Standard
UPDATE AVAILABLE
Track updates
AS/NZS 8124.3:2012
[Available Superseded]Safety of toys, Part 3: Migration of certain elements (ISO 8124-3:2010, MOD)
Adopts ISO 8124.3:2010 with national modifications to specify maximum acceptable levels and test methods relating to the migration of the elements antimony, arsenic, barium, cadmium, chromium, lead, mercury and selenium from toy materials.
Published: 25/01/2012
Pages: 21
Table of contents
Cited references
Content history
Table of contents
Header
About this publication
Preface
Introduction
1 Scope
1.1
1.2
1.3
1.4
2 Normative references
3 Terms and definitions
4 Maximum acceptable levels
4.1 Specific requirements
4.2 Interpretation of results
5 Principle
6 Reagents and apparatus
6.1 Reagents
6.1.1
6.1.2
6.1.3
6.1.4
6.1.5
6.1.6
6.1.7
6.2 Apparatus
6.2.1
6.2.2
6.2.3
6.2.4
6.2.5
6.2.6
7 Selection of test portions
8 Preparation and extraction of test portions
8.1 Coatings of paint, varnish, lacquer, printing ink, polymer and similar coatings
8.1.1 Test portion preparation
8.1.2 Extraction procedure
8.2 Polymeric and similar materials, including laminates, whether textile-reinforced or not, but excluding other textiles
8.2.1 Test portion preparation
8.2.2 Extraction procedure
8.3 Paper and paperboard
8.3.1 Test portion preparation
8.3.2 Extraction procedure
8.4 Natural, artificial or synthetic textiles
8.4.1 Test portion preparation
8.4.2 Extraction procedure
8.5 Glass/ceramic/metallic materials
8.5.1 Test portion preparation
8.5.2 Extraction procedure
8.6 Other materials, whether mass-coloured or not, e.g. wood, fibreboard, bone and leather
8.6.1 Test portion preparation
8.6.2 Extraction procedures
8.7 Materials intended to leave a trace
8.7.1 Test portion preparation for materials in solid form
8.7.2 Test portion preparation for materials in liquid form
8.7.3 Extraction procedure for samples not containing grease, oil, wax or similar material
8.7.4 Extraction procedure for samples containing grease, oil, wax or similar materials
8.8 Pliable modelling materials, including modelling clays and gels
8.8.1 Test portion preparation
8.8.2 Extraction procedure for samples not containing grease, oil, wax or similar material
8.8.3 Extraction procedure for samples containing grease, oil, wax or similar material
8.9 Paints, including finger paints, varnishes, lacquers, glazing powders and similar materials in solid or liquid form
8.9.1 Test portion preparation for materials in solid form
8.9.2 Test portion preparation for materials in liquid form
8.9.3 Extraction procedure for samples not containing grease, oil, wax or similar material
8.9.4 Extraction procedure for samples containing grease, oil, wax or similar material
9 Detection limits of quantitative elemental analysis
10 Test report
Annex A
Annex B
Annex C
C.1 Introduction
C.2 Scope
C.2.1 Requirement
C.2.2 Packaging
C.3 Specific requirements
C.4 Statistical uncertainty of the test procedure and interpretation of results
C.5 Apparatus
C.5.1 Plain-weave wire cloth stainless steel sieve
C.5.2 Means of measuring pH
C.5.3 Centrifuge
C.5.4 Series of containers
C.6 Selection of test portions
C.7 Paper and paperboard — Test portion preparation
C.8 Natural, artificial or synthetic textiles — Test portion preparation
C.9 Glass/ceramic/metallic materials — Test portion preparation
C.10 Other materials, whether mass-coloured or not
Bibliography
Amendment 1
Appendix ZZ
Amendment control sheet
AS/NZS 8124.3:2012
Amendment No. 1 (2016)
Revised text
Cited references in this standard
Content history
[Current]
[Superseded]
[Superseded]
[Superseded]
[Available Superseded]
One-time Purchase
Access via web browser on any device
One-time purchase
Single publication
Offline access via PDF^
$61.02 AUD
Inclusive of GSTFormat *
Web Reader
Licenses *
1 user
Total$61.02 AUD
IMPORTANT