Standard
UPDATE AVAILABLE
Track updates
AS/NZS ISO 8124.3:2021
[Current]Safety of Toys, Part 3: Migration of certain elements
Identically adopts ISO 8124-3:2020, which specifies maximum acceptable levels and methods of sampling, extraction and determination for the migration of the elements antimony, arsenic, barium, cadmium, chromium, lead, mercury and selenium from toy materials and from parts of toys. It does not apply to packaging materials are not included, unless they are intended to be kept, for example boxes and containers, or unless they form part of the toy or have intended play value. KEYWORDS: Toys; Sampling; Element migration; Extraction;
Published: 12/02/2021
Pages: 29
Table of contents
Cited references
Content history
Table of contents
Header
About this publication
Preface
Foreword
Introduction
1 Scope
1.1
1.2
1.3
1.4
2 Normative references
3 Terms and definitions
4 Maximum acceptable levels
4.1 Specific requirements
4.2 Interpretation of results
5 Principle
6 Reagents
6.1
6.2
6.3
6.4
6.5
6.6
6.7
7 Apparatus
7.1
7.2
7.3
7.4
7.5
7.6
7.7
7.8
7.9
8 Selection of test portions
9 Preparation and extraction of test portions
9.1 Coatings of paint, varnish, lacquer, printing ink, polymer and similar coatings
9.1.1 Test portion preparation
9.1.2 Extraction procedure
9.2 Polymeric and similar material, including laminates, whether textile-reinforced or not, but excluding other textiles
9.2.1 Test portion preparation
9.2.2 Extraction procedure
9.3 Paper and paperboard
9.3.1 Test portion preparation
9.3.2 Extraction procedure
9.4 Natural, artificial or synthetic textiles
9.4.1 Test portion preparation
9.4.2 Extraction procedure
9.5 Glass/ceramic/metallic materials
9.5.1 Test portion preparation
9.5.2 Extraction procedure
9.6 Other materials, whether mass-coloured or not (e.g. wood, fibreboard, bone and leather)
9.6.1 Test portion preparation
9.6.2 Extraction procedures
9.7 Materials intended to leave a trace
9.7.1 Test portion preparation for materials in solid form
9.7.1.1 General
9.7.1.2 Method A
9.7.1.3 Method B
9.7.2 Test portion preparation for materials in liquid form
9.7.3 Extraction procedure for samples not containing grease, oil, wax or similar material
9.7.4 Extraction procedure for samples containing grease, oil, wax or similar material
9.8 Pliable modelling materials, including modelling clays and gels
9.8.1 Test portion preparation
9.8.2 Extraction procedure for samples not containing grease, oil, wax or similar material
9.8.3 Extraction procedure for samples containing grease, oil, wax or similar material
9.9 Paints, including finger paints, varnishes, lacquers, glazing powders and similar material in solid or liquid form
9.9.1 Test portion preparation for materials in solid form
9.9.2 Test portion preparation for materials in liquid form
9.9.3 Extraction procedure for samples not containing grease, oil, wax or similar material
9.9.4 Extraction procedure for samples containing grease, oil, wax or similar material
10 Elemental analysis
10.1 Methods of analysis
10.2 Method detection limit (MDL)
10.3 Calculation of results
11 Test report
Annex A
Annex B
Annex C
C.1 Principle
C.2 Reagents
C.2.1
C.2.2
C.2.3
C.2.4
C.2.4.1
C.2.4.2
C.2.5
C.2.5.1
C.2.5.2
C.3 Apparatus
C.3.1
C.3.2
C.3.3
C.3.4
C.4 Analysis
C.4.1 General
C.4.2 Selection of wavelengths
C.4.3 Instrument settings
C.4.4 Calculation of results
C.4.4.1 Calibration curve
C.4.4.2 Calculation of migration
C.4.5 Quality control
C.4.5.1 Requirements for ICP-OES instruments
C.4.5.2 Method blank
C.4.5.3 Calibration check solutions
C.4.5.4 Quality control solutions
C.4.5.5 Certified reference materials
C.4.6 Method performance
C.4.6.1 Method detection limit (MDL)
C.4.6.2 Repeatability and reproducibility
Annex D
D.1 Introduction
D.2 Scope
D.2.1 Requirement
D.2.2 Packaging
D.3 Specific requirements
D.4 Statistical uncertainty of the test procedure and interpretation of results
D.5 Apparatus
D.5.1 Means of measuring pH
D.5.2 Centrifuge
D.5.3 Series of containers
D.6 Selection of test portions
D.7 Paper and paperboard — Test portion preparation
D.8 Natural, artificial or synthetic textiles — Test portion preparation
D.9 Glass/ceramic/metallic materials — Test portion preparation
D.10 Other materials, whether mass-coloured or not
Bibliography
Amendment 1
Amendment control sheet
AS/NZS ISO 8124.3:2021
Amendment No. 1 (2023)
Revised text amendment
Cited references in this standard
[Superseded]
Safety of toys - Part 1: Safety aspects related to mechanical and physical properties
[Superseded]
Safety of toys - Part 6: Certain phthalate esters in toys and children's products
Content history
[Current]
[Current]
[Superseded]
[Available Superseded]
DR AS/NZS ISO 8124.3:2020
One-time Purchase
Access via web browser on any device
One-time purchase
Single publication
Offline access via PDF^
$169.15 AUD
Inclusive of GSTFormat *
Web Reader
Licenses *
1 user
Total$169.15 AUD
IMPORTANT