Standard
UPDATE AVAILABLE
Track updates
AS/NZS 3004.1:2008
[Available Superseded]Electrical installations — Marinas and recreational boats, Part 1: Marinas
Specifies requirements for electrical installations associated with marinas supplied at low-voltage a.c. supply systems (i.e. exceeding 50 V a.c. but not exceeding 1 000 V a.c.).
Published: 19/11/2008
Pages: 21
Table of contents
Cited references
Content history
Table of contents
Header
About this publication
Preface
1 Scope and general
1.1 Scope
1.2 Application
1.3 Referenced documents
1.4 Definitions
1.5 Alterations, additions and repairs
1.6 Marine environment electrical safety considerations
1.6.1 Scope
1.6.2 Additional risk factors
1.6.3 Additional protection for equipment safety and instruction labels
1.6.4 Unacceptable measures against electric shock
1.7 Minimization of galvanic corrosion
1.8 Acceptable methods of connection to recreational boats
2 Marina electrical installation
2.1 Wiring details
2.1.1 General
2.1.2 Selection of electrical wiring systems
2.1.2.1 Acceptable wiring systems
2.1.2.2 Prohibited systems and materials
2.1.3 Earthing system
2.1.3.1 General
2.1.3.2 Prohibited practices
2.1.3.3 Bonding of metallic pipes and conduits
2.2 Maximum demand
2.2.1 Mains and submains
2.3 Isolating transformers
2.3.1 General
2.3.2 Protection
2.4 Switchboards providing low-voltage electrical supply to recreational boats
2.4.1 General
2.4.2 Service pillars
2.4.2.1 Introduction
2.4.2.2 Location
2.4.2.3 Accessibility
2.4.2.4 Socket-outlets
2.4.2.4.1 Number
2.4.2.4.2 Configuration and rating
2.4.2.4.3 Marking of socket-outlets
2.4.2.4.4 Overload protection
2.4.2.4.5 Additional protection against electric shock
2.4.2.4.6 Control
2.4.2.5 Facilities for direct connection
2.4.2.6 Construction of service pillars
2.4.2.6.1 General
2.4.2.6.2 Height
2.4.2.6.3 Weatherproofing
2.4.2.6.4 Doors and covers
2.4.2.6.5 Identification
2.4.3 Other switchboards
2.5 Other socket-outlets
3 Connection of recreational boats to a marina low-voltage electrical installation
3.1 Supply lead
3.1.1 General
3.1.2 Technical details
3.1.3 Length
3.1.4 Coiled leads
3.2 Installation of supply lead
3.3 Earthing
3.3.1 General
3.3.2 Supply through a shore-mounted isolating transformer
3.3.3 Supply through an on-board isolating transformer
3.3.4 Supply without an isolating transformer
4 New installations or additions
4.1 Periodic verification—Australia
4.1.1 Testing requirements
4.1.2 Recording of results
4.2 Periodic verification—New Zealand
4.2.1 Inspection requirements
4.2.2 Testing requirements
4.2.3 Testing of RCDs
4.2.4 Testing of isolating transformers
4.2.5 Certificate of Verification
Appendix A
Appendix B
Appendix C
Appendix D
D1 Introduction
D2 Proposed calculation values
D2.1 General
D2.2 Amenities
D2.3 Service pillars
D3 Determination of calculated maximum demand
Appendix E
Cited references in this standard
[Current]
Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 2: Dimensional compatibility requirements for pin and contact-tube accessories
[Current]
Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs), Part 1: General rules (IEC 61009-1, Ed. 3.2 (2013) MOD)
AS/NZS 60320
Appliance couplers for household and similar general purposes
[Current]
Electric cables - Polymeric insulated, Part 1: For working voltages up to and including 0.6/1 (1.2) kV
One-time Purchase
Access via web browser on any device
One-time purchase
Single publication
Offline access via PDF^
$119.17 AUD
Inclusive of GSTFormat *
Web Reader
Licenses *
1 user
Total$119.17 AUD
IMPORTANT