Standard
Track updates
AS 3850.3:2021
[Current]Prefabricated concrete elements, Part 3: Civil construction
Synopsis: AS 3850.3 provides requirements for planning, construction, design, casting, transportation, erection and incorporation into the structure of prefabricated concrete elements in civil, infrastructure and non-building construction
Published: 25/06/2021
Pages: 71
Table of contents
Cited references
Content history
Table of contents
Header
About this publication
Preface
1 Scope and general
1.1 Scope
1.2 Normative references
1.3 Terms and definitions
2 Design, construction and documentation
2.1 General
2.2 Design stages
2.3 Erection design
2.4 Structure stability during erection and construction
2.5 Design Considerations for manufacture, handling and erection
2.5.1 Size and shape
2.5.2 Determination of design loads
2.5.3 Typical rigging configurations
2.5.4 Lifting inserts
2.5.4.1 General
2.5.4.2 Re-use of lifting inserts
2.5.5 Bracing inserts
2.5.5.1 General
2.5.5.2 Cast-in fixing and bracing inserts (ferrules)
2.5.5.3 Specifying inserts
2.5.5.4 Specifying loads
2.5.5.5 Selection and location of inserts
2.5.5.6 Post-installed fixings and bracing inserts
2.5.6 Wind loads
2.5.7 Strength specification of concrete
2.5.8 Design of elements for manufacture, transport, installation and erection
2.5.9 Temporary bracing
2.5.9.1 General
2.5.9.2 Design of temporary bracing for vertical elements
2.5.9.3 Design of temporary propping for horizontal elements
2.5.9.4 Design of temporary supports, subject to combined vertical and horizontal loading
2.5.10 Slenderness, size and shape of concrete elements
2.5.11 Supports
2.6 Superimposed construction loads
2.7 Joints between prefabricated concrete elements
2.8 Footings
2.8.1 Permanent footings used for temporary support
2.8.2 Temporary footings, including deadman anchors and concrete mass blocks
2.9 Connections
2.9.1 General
2.9.2 Horizontal restraint of vertical elements
2.9.2.1 Construction conditions
2.10 Documentation
2.10.1 General
2.10.2 Essential information
2.10.3 Review of product documentation
2.10.3.1 Shop drawings and product-specific documentation
2.10.3.2 Erection documentation
2.11 Tolerances
3 Casting
3.1 General
3.2 Layout of on-site casting
3.3 Moulds
3.4 Curing and release agents
3.5 Lifting, bracing and fixing inserts
3.6 Welding of lifting, bracing or fixing inserts
3.7 Identification and orientation
3.8 Inspection
3.9 Compaction of concrete
4 Transport, cranage and erection
4.1 Transport
4.1.1 Planning
4.1.2 Loading
4.1.3 Unloading
4.2 Storage and multiple handling
4.3 Cranes and rigging
4.3.1 Cranes
4.3.2 Rigging
4.4 Erection and installation
4.4.1 Planning
4.4.2 Erection preparation
4.4.3 Erection platform
4.4.4 Element checks prior to lifting
4.4.5 Element release
4.4.6 Lifting and placing
4.4.7 Release of rigging
4.5 Pipes, poles, piles and elements with circular or near circular cross-section
5 Temporary supports
5.1 Installation and inspection of temporary bracing and propping
5.1.1 General
5.1.2 Brace connections
5.2 Superimposed loads
5.3 Levelling pads and shims
6 Fixing and grouting of structural elements and removal of temporary supports
6.1 Fixing of elements
6.2 Grouting of elements
6.3 Inspection and removal of temporary supports
6.4 Damage and repair
Appendix A
Appendix B
B.1 Component design
B.2 Erection design
B.3 In-service design
B.4 Product specific design
B.5 Pre-casting inspection
B.6 Rigging
B.7 Storage design
B.8 Supported element inspection
B.9 Temporary support inspection
B.10 Post-installed fixing installation
B.11 Transport inspection
Appendix C
Appendix D
Bibliography
Cited references in this standard
AS/NZS 1554
Structural steel welding
Content history
DR AS 3850.3:2019
One-time Purchase
Access via web browser on any device
One-time purchase
Single publication
Offline access via PDF^
$203.34 AUD
Inclusive of GSTFormat *
Web Reader
Licenses *
1 user
Total$203.34 AUD
IMPORTANT