Standard
Track updates
AS 2402.1.1-2005
[Current]Traction batteries — Lead-acid, Part 1.1: Vented cells — Requirements
Provides requirements for lead-acid batteries of the vented type intended for installation in electric traction vehicles such as forklift trucks. It includes requirements for traction cells used in engine starting applications, e.g. starting of emergency diesel generators. It includes tests to verify performance requirements.
Published: 14/01/2005
Pages: 29
Table of contents
Cited references
Content history
Table of contents
Header
About this publication
Preface
1 Scope and general
1.1 Scope
1.2 Referenced documents
1.3 Definitions
2 Design and construction
2.1 Cell dimensions
2.2 Connections
2.3 Connection to battery
2.3.1 Means of connection
2.3.1.1 General
2.3.1.2 Sizing of battery leads
2.3.2 Thimbles
2.4 Vent plugs
2.5 Electrolyte
2.6 Sealing
3 Performance requirements
3.1 General
3.2 Rated capacity
3.2.1 5 h rate
3.2.2 ½ h rate
3.3 Life
3.4 Leakage
3.5 Charge retention
4 Marking
4.1 General
4.2 Batteries for industrial trucks
4.3 Batteries for other than industrial trucks
4.3.1 Information to be marked on batteries
4.3.2 Information to be supplied by the battery manufacturer or supplier
5 Diesel locomotive starting batteries
5.1 General
5.2 Take-off terminals
5.3 Contact faces
5.4 Performance requirements
Appendix A
A1 General
A2 Trays
A2.1 Steel trays
A2.2 Fibreglass or plastic trays
A3 Battery installation in industrial trucks
A3.1 Intercell connectors
A3.2 Insulating barriers
A3.3 Unshrouded cell terminals
Appendix B
B1 Scope
B2 Principle
B3 Apparatus (See Figure B1)
B4 Test rig (See Figure B1)
B5 Procedure
B6 Criterion
B7 Test report
Appendix C
C1 Scope
C2 Principle
C3 Apparatus
C4 Temperature measurement
C5 Procedure for the 5 h rate
C6 Procedure for the ½ h rate
C7 Calculations
C8 Test report
Appendix D
D1 Scope
D2 Principle
D3 Apparatus
D4 Temperature measurement
D5 Procedure
D6 Test report
Appendix E
E1 Scope
E2 Principle
E3 Apparatus
E4 Procedure
E5 Test report
Appendix F
F1 Scope
F2 Principle
F3 Apparatus
F4 Procedure
F5 Test report
Appendix G
G1 Scope
G2 Test specimen
G3 Breakaway current test
G3.1
G3.2 Criteria of acceptance
G4 Cranking current test
G4.1 Procedure
G4.2 Criteria of acceptance
G5 Repeat starting test
G5.1 Procedure
G5.2 Criteria of acceptance
Cited references in this standard
[Current]
Direct acting indicating analogue electrical measuring instruments and their accessories - Part 2: Special requirements for ammeters and voltmeters
[Current]
Electric cables - Polymeric insulated, Part 1: For working voltages up to and including 0.6/1 (1.2) kV
[Current]
Traction batteries — Lead-acid, Part 2.1: Valve-regulated cells — Requirements
One-time Purchase
Access via web browser on any device
One-time purchase
Single publication
Offline access via PDF^
$169.15 AUD
Inclusive of GSTFormat *
Web Reader
Licenses *
1 user
Total$169.15 AUD
IMPORTANT