Standard
UPDATE AVAILABLE
AS 5041-2003
[Superseded]Methods of test — Security screen doors and window grilles
This Standard sets out methods of test for the performance of hinged and sliding security screen doors and security window grilles used primarily in residential situations.
Published: 05/06/2003
Pages: 43
Table of contents
Cited references
Content history
Table of contents
Header
About this publication
Preface
1 Scope and general
1.1 Scope
1.2 Referenced documents
1.3 Alternative methods
1.4 Definitions
1.5 List of methods
2 Test specimen and preparation for testing
2.1 Scope
2.2 General
2.3 Principle
2.4 Test specimen
2.4.1 Security screen doors
2.4.1.1 General
2.4.1.2 Hinges (for hinged screen doors only)
2.4.1.3 Lock fittings
2.4.2 Security window grilles
2.4.2.1 General
2.4.2.2 Hinges (for hinged window grilles only)
2.5 Preparation for testing
2.5.1 General
2.5.2 Hinged doors
2.5.3 Sliding doors and window grilles
2.6 Test application
3 Dynamic impact test
3.1 Scope
3.2 Principle
3.3 Definitions
3.4 Apparatus
3.4.1 General
3.4.2 Support frame
3.4.3 Standard impactor and suspension
3.5 Impact energy
3.6 Test procedure
3.7 Test report
4 Jemmy test
4.1 Scope
4.2 Principle
4.3 Apparatus
4.4 Test procedure
4.4.1 Attack on hinged security screen doors
4.4.1.1 Attack upon locks
4.4.1.2 Anti-jemmy strips
4.4.1.3 Hinge attack
4.4.2 Attack on sliding security screen doors
4.5 Attack on security window grilles
4.5.1 Anti-jemmy strips/anti-jemmy stop beads
4.5.2 Lock attack
4.5.3 Hinge/fastening point attack
4.6 Test report
5 Pull test
5.1 Scope
5.2 Principle
5.3 Apparatus
5.4 Test procedure
5.4.1 Method of application of pull test forces to the test specimen
5.4.2 Zones for application of pull force
5.5 Pull test
5.5.1 Centre pull test (only applicable to Type I and II test specimens)
5.5.2 Centre pull test locking and non locking edge (only applicable to sliding doors)
5.5.3 Locking point pull test (only applicable to sliding doors and Class B, Class C and Class D window grilles)
5.5.4 Top pull test (applicable to hinged doors and window grilles)
5.5.5 Top frame pull test (only applicable to sliding doors)
5.5.6 Bottom pull test (only applicable to hinged doors and window grilles)
5.5.6.1 For hinged doors
5.5.6.2 For window grilles
5.5.7 Bottom frame pull test (only applicable to sliding doors)
5.5.8 Angled pull test (only applicable to sliding doors and sliding window grilles)
5.6 Test report
6 Probe test
6.1 Scope
6.2 Principle
6.3 Apparatus
6.4 Test procedure
6.5 Test report
7 Shear test
7.1 Scope
7.2 Principle
7.3 Apparatus
7.4 Test procedure
7.5 Test report
8 Knife shear test
8.1 Scope
8.2 Principle
8.3 Test specimen
8.4 Apparatus
8.5 Test procedure
8.6 Test report
Amendment control sheet
Cited references in this standard
[Withdrawn]
Pressure-sensitive and water activated adhesive tape for packaging and office applications
Content history
[Current]
[Current]
[Superseded]
[Superseded]
[Superseded]
$128.88
AUD
Inclusive of GST
Available formats
Web Reader
Licence:
1 user
Total
$128.88
