Standard
UPDATE AVAILABLE
Track updates
AS 3786-1993
[Available Superseded]Smoke alarms
Specifies the requirements for the design and performance of electrically operated smoke alarms containing detection and alarm facilities. It also allows, but does not require, for the inclusion within the smoke alarm facilities for inter-connection with other units or accessories. Where such facilities are included, the Standard specifies requirements for the connection interface. It is not intended that this interface be used for connection to remote monitoring stations. The Standard applies to smoke alarms for installation within residential accommodation where connection to remote monitoring is not required.
Published: 13/04/1993
Pages: 15
Table of contents
Cited references
Content history
Table of contents
Header
About this publication
PREFACE
1 SCOPE AND GENERAL
1.1 SCOPE
1.2 APPLICATION
1.3 ‘Not applicable’
1.4 INTERPRETATIONS
1.5 REFERENCED DOCUMENTS
1.6 CLASSIFICATION
1.7 DEFINITIONS
1.8 INTERPRETATION OF SPECIFIED LIMITING VALUES
2 GENERAL REQUIREMENTS
2.1 GENERAL
2.2 POWER SUPPLY
2.2.1 Primary power supply
2.2.2 Stand-by power supply
2.3 BATTERIES AND BATTERY CONNECTIONS
2.3.1 General
2.3.2 Battery location
2.3.3 Battery compartment
2.3.4 Battery connections
2.3.5 Battery leads
2.3.6 Missing battery indication
2.3.7 Disconnect facility
2.4 MATERIALS AND COMPONENTS
2.4.1 Resistance to corrosion
2.4.2 Resistance to high temperatures
2.5 DESIGN AND CONSTRUCTION
2.5.1 Suitability
2.5.2 Electrical and electronic components
2.5.3 Mechanical design
2.6 MOUNTING FACILITIES
2.7 SENSITIVITY ADJUSTMENTS
2.8 CONNECTING FACILITIES
2.8.1 General
2.8.2 Interconnection facilities
2.9 ELECTRICAL SAFETY
2.10 SELF TEST FACILITY
2.11 RADIOACTIVE MATERIALS
2.11.1 General
2.11.2 Design
2.12 LIGHT EMITTING DIODE (LED) SOURCE LAMPS
2.13 ‘Not applicable’
2.14 ALARM SILENCING MEANS
2.15 ALARM SIGNAL
3 PERFORMANCE REQUIREMENTS
3.1 GENERAL
3.2 SENSITIVITY
3.3 ELECTRICAL REQUIREMENTS
3.3.1 General
3.3.2 Voltage stability
3.3.3 Insulation resistance
3.3.3.1 Pre-corrosion test
3.3.3.2 Post corrosion test
3.3.4 Static discharge
3.3.5 Electromagnetic interference
3.3.6 Impulse voltage withstand
3.3.7 High-frequency disturbance
3.3.8 Overload
3.3.9 Endurance
3.4 ENVIRONMENTAL REQUIREMENTS
3.4.1 General
3.4.2 Low temperature
3.4.3 Damp heat
3.4.4 Dry heat
3.4.5 Vibration
3.4.6 Corrosion
3.4.7 Air velocity stability
3.4.8 Dust
3.5 SOUND PRESSURE LEVEL
3.6 STRENGTH OF SCREW THREAD AND FIXINGS
4 PRODUCT INFORMATION AND MARKING
4.1 GENERAL
4.2 INSTRUCTIONS
4.3 PACKAGING
4.3.1
4.3.2
5 ASSESSMENT OF COMPLIANCE
5.1 GENERAL
5.2 DOCUMENTATION
5.3 CRITERIA OF ACCEPTANCE AND TEST SCHEDULE
AMENDMENT CONTROL SHEET
Cited references in this standard
[Withdrawn]
Fire detection, warning, control and intercom systems, Method 21: Methods of test — Endurance test
[Withdrawn]
Fire detection, warning, control and intercom systems, Method 15: Methods of test — Vibration test
[Withdrawn]
Automatic fire detection and alarm systems, Method 17: Methods of test for actuating devices — Sensitivity test
[Withdrawn]
Fire detection, warning, control and intercom systems, Method 18: Methods of test — Air velocity stability test
[Withdrawn]
Fire detection, warning, control and intercom systems, Method 19: Methods of test — Dust test
Content history
[Available Superseded]
[Available Superseded]
[Available Superseded]
[Available Superseded]
[Available Superseded]
$79.54
AUD
Inclusive of GST
Available formats
Web Reader
Licence:
1 user
Total
$79.54
