Standard
UPDATE AVAILABLE
Track updates
AS 1905.1:2015
[Current]Components for the protection of openings in fire-resistant walls, Part 1: Fire-resistant doorsets
Sets out requirements for the construction and installation of fire-resistant doorsets that are used to protect openings in walls, and for partitions that are required to resist the passage of fire. The requirements also apply to transom panels over doors, where the panels are contained within the doorframe and form part of the doorset.
Published: 25/08/2015
Pages: 39
Table of contents
Cited references
Content history
Table of contents
Header
About this publication
Preface
1 Scope and general
1.1 Scope
1.2 Application
1.3 Normative references
1.4 Definitions
2 Design requirements
2.1 General requirements
2.1.1 Design
2.1.2 Materials
2.1.3 Self-closure and self-latching
2.1.4 Selection of hardware
2.1.4.1 General
2.1.4.2 Self-latching mechanism
2.1.4.3 Self-closing
2.1.4.4 Locksets and door-closing devices
2.1.4.5 Electric bolts
2.1.4.6 Sequencers
2.1.5 Clearances
2.1.6 Wall openings
2.1.7 Sensing device
2.2 Thresholds
2.3 Side-hung doors, including double-acting doorsets
2.3.1 Width of door seat rebate
2.3.2 Hinges and pivots
2.3.2.1 General
2.3.2.2 Door operational forces
2.3.2.3 Vertical loading test
2.3.2.3.1 Procedure
2.3.2.3.2 Pass criterion
2.3.3 Materials for essential latching components
2.3.4 Closer pressure relief
2.3.5 Cushioned back-checking action of the closer
2.3.6 Remote release
2.4 Sliding doorsets
2.4.1 Flush pulls and grips
2.4.2 Directional arrows
2.4.3 Automatic closing
2.5 Vision panels
3 Determination of fire resistance
4 Variations from the tested specimen
4.1 General
4.2 Minimum fire testing requirements for the preparation of assessment
4.3 Assessment report
4.4 Variations that require full-scale fire testing
4.5 Variations that require full-scale testing or pilot testing
4.6 Variations to be assessed without additional testing
4.7 Permissible variations for fixing of doorframes
5 Installation
5.1 General
5.2 Metal doorframes in non-masonry walls
5.3 Metal doorframes in masonry walls
5.3.1 Fixing of metal doorframes
5.3.2 Backfilling of metal doorframes
5.4 Timber doorframes
5.5 Clearances around door leaves
5.5.1 Threshold and floor finish
5.5.2 Side-hung door, leaf-to-frame
5.5.3 Side-hung door, leaf-to-doorstop
5.5.4 Double-acting doorsets
5.5.5 Sliding doorsets
5.6 Hardware
5.6.1 Attachment
5.6.2 Latch handles
5.6.3 Sensing devices
5.6.4 Travel-limiting devices
5.6.5 Hinge and pivot alignment
5.6.6 Counterweighting system for sliding doors
5.6.6.1 Protection
5.6.6.2 Adjustment
5.7 Final check
6 Marking and other documentation
6.1 Marking of fire-resistant doorsets
6.1.1 General
6.1.2 Completed installation
6.1.3 Metal tags
6.1.4 Information requirements
6.1.4.1 Doorframe
6.1.4.2 Door leaf
6.2 Marking of latchsets, closers and seals
6.2.1 General
6.2.2 Latchset assembly
6.2.3 Essential latching components
6.2.4 Closer body
6.2.5 Seal
6.3 Evidence
6.3.1 Installation and certification
6.3.2 Records and required information
6.3.3 Schedule of evidence
Appendix A
A1 Scope
A2 Principle
A3 Apparatus
A4 Specimen
A5 Test methods
A5.1 General
A5.2 Resistance to buckling (torsion)
A5.2.1 Procedure
A5.2.2 Pass criterion
A5.3 Resistance to slamming
A5.3.1 Procedure
A5.3.2 Pass criteria
A5.4 Shock impact
A5.4.1 Procedure
A5.4.2 Pass criterion
A5.5 Body impact
A5.5.1 Procedure
A5.5.2 Pass criteria
A5.6 Resistance to misuse
A5.6.1 Procedure
A5.6.2 Pass criteria
A6 Test report
Appendix B
Appendix C
Amendment control sheet
Bibliography
Cited references in this standard
[Current]
Methods for fire tests on building materials, components and structures, Part 4: Fire-resistance tests for elements of construction
[Current]
Methods for fire tests on building materials, components and structures, Part 1: Combustibility test for materials
$135.16
AUD
Inclusive of GST
Available formats
Web Reader
Licence:
1 user
Total
$135.16
