Standard
Track updates
AS 1192-2004
[Current]Electroplated coatings — Nickel and chromium
Specifies the requirements for electroplated coatings of nickel and nickel plus chromium on steel or iron, zinc alloy, copper or copper alloy, aluminium or aluminium alloys.
Published: 02/04/2004
Pages: 26
Table of contents
Cited references
Content history
Table of contents
Header
About this publication
Preface
1 Scope and general
1.1 Scope
1.2 Referenced documents
1.3 Definitions
1.4 Service condition number
1.5 Classification of coatings
1.6 Contact points
2 Coating requirements for nickel plus chromium
2.1 General
2.2 Appearance
2.3 Coating finish and thickness requirements
2.3.1 General
2.3.2 Double-layer or triple-layer nickel (d)
2.3.3 Chromium
2.4 Adhesion
2.5 Corrosion resistance
3 Nickel alone or with topcoats other than chromium
3.1 General
3.2 Coatings appropriate to application grades
Appendix A
Appendix B
B1 Scope
B2 Statistical sampling
B3 Product certification
B4 Supplier's quality management system
B5 Other means of assessment
Appendix C
Appendix D
D1 Scope
D2 Requirements
D3 Categorization of steels
D4 Stress relief
D4.1 High strength steels
D4.2 Shorter times at higher temperatures
D4.3 Stress relief temperatures after shot peening
D4.4 Steels below 1400 MPa
Appendix E
E1 Scope
E2 Requirements
E3 Embrittlement relief treatment classes
E4 Heat treatment after processing
E4.1 Heat treatment
E4.2 High strength steels
E4.3 Threads and sharp notches
E4.4 Surface-hardened, through-hardened and bearing steels
E4.5 Hardness loss for chromium steels
Appendix F
Appendix G
G1 General
G2 Thickness of chromium
G2.1 Where anti-stick properties are required
G2.2 Where wear resistance only is required
G2.3 Where worn or overmachined items to be reclaimed
G3 Finishing to size
Cited references in this standard
[Current]
Methods of test for metallic and related coatings, Method 3.3: Corrosion and related property tests — Copper accelerated acetic acid salt spray test (CASS test)
[Current]
Methods of test for metallic and related coatings, Method 3.10: Corrosion and related property tests — Cracks and pores in chromium
[Current]
Methods of test for metallic and related coatings, Method 4.4: Physical test — Assessment of intensity of shot-peening
[Current]
Methods of test for metallic and related coatings, Method 3.2: Corrosion and related property tests — Acetic acid salt spray test (ASS test)
[Current]
Methods of test for metallic and related coatings, Method 1.2: Local thickness tests — Coulometric method
$113.50
AUD
Inclusive of GST
Available formats
Web Reader
Licence:
1 user
Total
$113.50
