Standard
AS/NZS 2210.4:2009
[Withdrawn]Occupational protective footwear, Part 4: Specification for protective footwear (ISO 20346:2004, MOD)
Adopts ISO 20345:2004 to specify basic and additional (optional) requirements for protective footwear.
Published: 21/08/2009
Pages: 28
Table of contents
Cited references
Content history
Table of contents
Header
About this publication
Preface
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Basic requirements for protective footwear
5.1 General
5.2 Design
5.2.1 General
5.2.2 Height of upper
5.2.3 Seat region
5.3 Whole footwear
5.3.1 Sole performance
5.3.1.1 Construction
5.3.1.2 Upper/outsole bond strength
5.3.2 Toe protection
5.3.2.1 General
5.3.2.2 Internal length of toecaps
5.3.2.3 Impact resistance of protective footwear
5.3.2.4 Compression resistance of protective footwear
5.3.2.5 Behaviour of toecaps
5.3.2.5.1 Corrosion resistance of metallic toecaps
5.3.2.5.2 Non-metallic toecaps
5.3.3 Leakproofness
5.3.4 Specific ergonomic features
5.4 Upper
5.4.1 General
5.4.2 Thickness
5.4.3 Tear strength
5.4.4 Tensile properties
5.4.5 Flexing resistance
5.4.6 Water vapour permeability and coefficient
5.4.7 pH value
5.4.8 Hydrolysis
5.4.9 Chromium VI content
5.5 Lining
5.5.1 Tear strength
5.5.2 Abrasion resistance
5.5.3 Water vapour permeability and coefficient
5.5.4 pH value
5.5.5 Chromium VI content
5.6 Tongue
5.6.1 Tear strength
5.6.2 pH value
5.6.3 Chromium VI content
5.7 Insole and insock
5.7.1 Thickness
5.7.2 pH value
5.7.3 Water absorption and desorption
5.7.4 Abrasion resistance
5.7.4.1 Insoles
5.7.4.2 Insocks
5.7.5 Chromium VI content
5.8 Outsole
5.8.1 Thickness of non-cleated outsoles
5.8.2 Tear strength
5.8.3 Abrasion resistance
5.8.4 Flexing resistance
5.8.5 Hydrolysis
5.8.6 Interlayer bond strength
5.8.7 Resistance to fuel oil
6 Additional requirements for protective footwear
6.1 General
6.2 Whole footwear
6.2.1 Penetration resistance
6.2.1.1 Determination of penetration force
6.2.1.2 Construction
6.2.1.3 Dimensions
6.2.1.4 Flex resistance of penetration-resistant inserts
6.2.1.5 Behaviour of penetration-resistant inserts
6.2.1.5.1 Corrosion resistance of penetration-resistant metallic inserts
6.2.1.5.2 Penetration-resistant non-metallic inserts
6.2.2 Electrical properties
6.2.2.1 Conductive footwear
6.2.2.2 Antistatic footwear
6.2.2.3 Electrically insulating footwear
6.2.3 Resistance to inimical environments
6.2.3.1 Heat insulation of sole complex
6.2.3.2 Cold insulation of sole complex
6.2.4 Energy absorption of seat region
6.2.5 Water resistance
6.2.6 Metatarsal protection
6.2.6.1 Construction
6.2.6.2 Impact resistance of metatarsal protective device
6.2.7 Ankle protection
6.3 Upper
6.3.1 Water penetration and water absorption
6.3.2 Construction
6.3.3 Cut resistance
6.3.3.1 Design
6.3.3.2 Construction
6.3.3.3 Resistance to cutting
6.3.3.4 Penetration resistance
6.4 Outsole
6.4.1 Cleated area
6.4.2 Thickness of cleated outsoles
6.4.3 Cleat height
6.4.4 Resistance to hot contact
7 Marking
8 Information to be supplied
8.1 General
8.2 Electrical properties
8.2.1 Conductive footwear
8.2.2 Antistatic footwear
8.2.3 Electrically insulating footwear
8.3 Insocks
Bibliography
Technical Corrigendum 1
Technical Corrigendum 2
Amendment 1
Annex A
A.1 General
A.2 Slip resistance on ceramic tile floor with sodium lauryl sulphate (SLS) solution
A.3 Slip resistance on steel floor with glycerol
A.4 Slip resistance on ceramic tile floor with SLS and on steel floor with glycerol
Appendix ZZ
ZZ1 Explanation
ZZ2 Referenced documents
ZZ3 Variations
Appendix ZA
ZA1 Scope
ZA2 Statistical sampling
ZA3 Product certification
ZA4 Supplier's quality management system
ZA5 Other means of assessment
Cited references in this standard
[Current]
Sampling procedures for inspection by attributes, Part 0: Introduction to the ISO 2859 attribute sampling system
[Withdrawn]
Conformity assessment — Guidance on a third-party certification system for products
[Current]
Quality management systems - Requirements - AMENDMENT 1: Climate action changes
[Current]
Quality management - Quality of an organization - Guidance to achieve sustained success
SNZ HB18.28
Guidelines for third-party certification and accreditation—Guide 28—General rules for a model third-party certification system for products
Content history
[Superseded]
[Superseded]
[Superseded]
[Superseded]
ISO 20346:2004/Amd.1:2007
$154.94
AUD
Inclusive of GST
Available formats
Web Reader
Licence:
1 user
Total
$154.94
