Standard
UPDATE AVAILABLE

AS/NZS ISO/IEC 14763.2:2014

[Superseded]

Information technology — Implementation and operation of customer premises cabling, Part 2: Planning and installation

Adopts ISO/IEC 14763-2:2012 to specify requirements for the planning, installation and operation of cabling and cabling infrastructures (including cabling, pathways, spaces, earthing and bonding) in support of generic cabling standards and associated documents.
Published: 17/06/2014
Pages: 128
Table of contents
Cited references
Content history
Table of contents
Header
About this publication
Preface
INTRODUCTION
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
3.1 Terms and definitions
3.2 Abbreviations
3.3 Conventions
4 Conformance
5 Specification of installations
5.1 General
5.2 Installation specification
5.2.1 Requirements
5.2.1.1 General
5.2.1.2 Other infrastructures
5.2.1.3 Legislation, regulations and statements of compliance
5.2.1.4 Site contacts
5.2.2 Recommendations
5.3 Technical specification
5.3.1 General
5.3.1.1 Requirements
5.3.1.2 Recommendations
5.3.2 Safety requirements
5.3.3 Security requirements
5.3.4 Performance and configuration - Requirements
5.3.5 Environmental conditions
5.3.5.1 Requirements
5.3.5.2 Recommendations
5.4 Scope of work
5.4.1 Pre-installation
5.4.1.1 Requirements
5.4.1.2 Recommendations
5.4.2 Installation
5.4.2.1 Requirements
5.4.2.2 Recommendations
5.4.3 Post-installation
5.4.3.1 Requirements
5.4.3.2 Recommendations
5.5 Quality assurance
6 Quality planning
6.1 Quality plan
6.2 Sampling
6.2.1 Balanced cabling
6.2.1.1 General
6.2.1.2 Permanent link testing
6.2.1.3 Channel testing
6.2.1.4 Alien (exogenous) crosstalk testing
6.2.2 Optical fibre cabling
6.2.2.1 General
6.2.2.2 Permanent link testing
6.2.2.3 Channel testing
6.3 Treatment of marginal results
6.3.1 Balanced cabling
6.3.1.1 General
6.3.1.2 Requirements
6.3.2 Optical fibre cabling
6.4 Treatment of non-compliant results
6.5 Change control
7 Installation planning
7.1 General
7.2 Safety
7.2.1 General
7.2.2 Mains power cabling
7.2.3 Optical fibre cabling
7.3 Environment
7.4 Points of electrical contact
7.5 External service provision
7.5.1 Requirements
7.5.2 Recommendations
7.6 Pathways and pathway systems
7.6.1 General
7.6.1.1 Pathway system types
7.6.1.2 Pathway systems - Requirements
7.6.1.3 Recommendations
7.6.1.3.1 Pathway and pathway system selection
7.6.1.3.2 Pathway and pathway system capacity planning
7.6.2 Inside buildings
7.6.2.1 Requirements
7.6.2.1.1 Pathway systems
7.6.2.1.2 Minimum bend radii
7.6.2.1.3 Maximum stacking height
7.6.2.1.4 Conduit
7.6.2.1.5 Non-continuous support for cables
7.6.2.2 Recommendations
7.6.2.2.1 Pathway system capacity planning
7.6.2.2.2 Cable protection
7.6.2.2.3 Conduit
7.6.3 Outside buildings
7.6.3.1 General
7.6.3.2 Requirements
7.6.3.2.1 Pathway planning
7.6.3.2.2 Underground pathways
7.6.3.2.3 Aerial pathways
7.6.3.2.4 Minimum bend radii
7.6.3.3 Recommendations
7.6.3.3.1 General
7.6.3.3.2 Underground pathways
7.6.3.3.3 Aerial pathways
7.7 Spaces
7.7.1 Requirements
7.7.1.1 General
7.7.1.2 Spaces and structures outside buildings
7.7.1.3 Entrance facilities
7.7.1.4 Rooms intended to contain distributors
7.7.1.5 Enclosures containing distributors
7.7.2 Recommendations
7.7.2.1 General
7.7.2.2 Spaces and structures outside buildings
7.7.2.3 Rooms intended to contain distributors
7.8 Functional elements
7.8.1 Requirements
7.8.1.1 General
7.8.1.2 Termination points
7.8.1.3 Distributors within rooms
7.8.1.4 Cabinets, frames and racks
7.8.2 Recommendations
7.8.2.1 Distributors within rooms
7.8.2.2 Distributors within enclosures
7.8.2.3 Cabinets, frames and racks
7.9 Segregation of information technology cabling and mains power cabling
7.9.1 General
7.9.2 Requirements
7.9.2.1 General requirements
7.9.2.2 Conditions for zero segregation
7.9.3 Recommendations
7.10 Cabling - Requirements
7.10.1 General
7.10.2 Unscreened cabling
7.10.3 Screened cabling
7.10.4 Optical fibre cabling
8 Installation practices
8.1 General
8.2 Safety
8.2.1 General
8.2.2 Mains power cabling
8.2.3 Functional bonding
8.2.4 Optical fibre cabling
8.2.5 Guards and signs
8.2.6 Enclosed spaces
8.2.7 Maintenance holes
8.2.8 Closures
8.3 Environment
8.3.1 Storage
8.3.1.1 Requirements
8.3.1.2 Recommendations
8.3.2 Installation - Requirements
8.4 Component inspection and testing - Requirements
8.5 Pathways
8.5.1 Requirements
8.5.2 Inside buildings - Requirements
8.5.3 Outside buildings
8.5.3.1 Requirements
8.5.3.1.1 Overhead
8.5.3.1.2 Underground
8.5.3.2 Recommendations
8.5.3.2.1 Overhead
8.5.3.2.2 Underground
8.6 Spaces
8.6.1 Requirements
8.6.2 Entrance facilities
8.6.3 Rooms and enclosures intended to contain distributors
8.6.4 Cabinets, frames and racks
8.6.5 Closures
8.6.6 Outlets
8.7 Pathway system installation
8.7.1 General
8.7.1.1 Requirements
8.7.1.2 Recommendations
8.7.2 Inside buildings
8.7.2.1 Requirements
8.7.2.2 Recommendations
8.7.3 Outside buildings
8.7.3.1 Requirements
8.7.3.2 Recommendations
8.8 Closure installation
8.9 Cable installation
8.9.1 Cable installation within pathway systems
8.9.2 General
8.9.2.1 Requirements
8.9.2.2 Recommendations
8.9.3 Inside buildings
8.9.3.1 Requirements
8.9.3.2 Recommendations
8.9.4 Cable installation in maintenance holes
8.9.5 Cable installation within closures - Requirements
8.10 Jointing and terminating of cables
8.10.1 Requirements
8.10.2 Balanced cabling
8.10.3 Screened balanced cabling
8.10.4 Optical fibre cabling
8.11 Cords and jumpers
8.12 Surge protective devices
8.13 Acceptance
8.13.1 Inspection
8.13.2 Testing
9 Documentation and administration
9.1 Symbols and preparation of documents
9.1.1 Requirements
9.1.2 Recommendations
9.2 Administration
9.2.1 General
9.2.2 Administration system
9.2.2.1 General
9.2.2.2 Installation complexity
9.2.2.3 Operational complexity
9.2.2.4 Administration system
9.2.2.4.1 Requirements
9.2.2.4.2 Recommendations
9.2.3 Identifiers - Requirements
9.2.4 Component labelling
9.2.4.1 Requirements
9.2.4.2 Recommendations
9.2.4.2.1 Labelling
9.2.4.2.2 Colour coding
9.2.5 Records
9.2.5.1 General
9.2.5.2 Requirements
9.2.5.3 Recommendations
9.2.5.4 Optional
9.2.5.5 Other recommended documentation
9.2.6 Cable administration system
9.2.6.1 General
9.2.6.2 Requirements
9.2.6.3 Recommendations
9.2.7 Reports
9.2.7.1 Requirements
9.2.7.2 Recommendations
10 Testing
10.1 General
10.1.1 Links and permanent links
10.1.2 Channels
10.1.3 Cabling interface adaptors
10.1.4 Calibration
10.1.5 Equipment protection
10.1.6 Measurement conditions
10.2 Test procedures for balanced cabling
10.2.1 General
10.2.2 Measurement of length-related parameters
10.2.3 Treatment of marginal test results
10.2.4 Treatment of unacceptable test results
10.2.5 Test result format
10.2.6 Test result documentation
10.2.6.1 Equipment in accordance with IEC 61935-1
10.2.6.2 Other equipment
10.3 Test procedures for optical fibre cabling
10.3.1 General
10.3.2 Treatment of unacceptable test results
10.3.3 Test result documentation
11 Inspection
11.1 General
11.2 Inspection Level 1
11.3 Inspection Level 2
11.4 Inspection Level 3
11.5 Inspection documentation - Requirements
12 Operation
12.1 Standard operating procedure
12.1.1 Requirements
12.1.2 Recommendations
12.2 Cords and jumpers
12.3 Optical fibre adaptors
13 Maintenance
13.1 Approaches to maintenance
13.1.1 General
13.1.2 Requirements
13.2 Maintenance procedures
13.2.1 Requirements
13.2.2 Recommendations
14 Repair
Annex A
A.1 General
A.2 Duplex connecting hardware interfaces
A.2.1 Duplex plugs, adapters and cords
A.2.2 Polarity of installed cabling segments
A.2.3 Symmetrical positioning method
A.2.4 Reverse-pair positioning method
A.3 Array connecting hardware interfaces
A.3.1 General
A.3.2 Array connecting hardware components
A.3.2.1 General
A.3.2.2 Cables and array connector patch cords
A.3.2.3 Array adapters
A.3.2.4 Transition assemblies for duplex cabling
A.3.3 Array connectivity methods
A.3.3.1 Duplex channels
A.3.3.2 Parallel optics channels
Annex B
B.1 General
B.7 Installation planning
B.7.6 Pathways and pathway systems
B.7.6.1 Common pathways and spaces bypass (diverse cable routing)
B.7.6.2 Requirements
B.7.6.2.1 Access and security
B.7.6.2.2 External network entrance pathways
B.7.6.2.3 Common pathways within the premises
B.7.6.3 Recommendations
B.7.6.3.1 Campus pathways
B.7.6.3.2 External network entrance pathways
B.7.6.3.3 Common pathways within the premises
B.7.8 Spaces
B.7.8.1 Requirements
B.7.8.1.1 Entrance room
B.7.8.1.2 Access provider and external service provider spaces
B.7.8.1.3 CERs
B.7.8.1.4 CTRs
B.7.8.2 Recommendations
B.7.8.2.1 Access provider and external service provider spaces
B.7.8.2.2 CERs
B.7.8.2.3 CTRs
Annex C
C.1 General
C.5 Specification of installations
C.5.2 Installation specification
C.5.2.2 Recommendations
C.5.2.2.1 Application considerations
C.5.2.2.2 External service provision
C.5.3 Technical specification
C.5.3.4 Performance and configuration
C.5.3.4.2 Recommendations
C.7 Installation planning
C.7.6 Pathways and pathway systems
C.7.6.1 Requirements
C.7.6.1.2 Pathway systems
C.7.6.1.2.1 Pathway system co-ordination
C.7.6.2 Recommendations
C.7.6.2.1 Pathways
C.7.6.2.1.1 Pathway co-ordination
C.7.6.2.1.2 Security
C.7.6.2.1.3 Building entrance pathways
C.7.6.2.2 Pathway systems
C.7.6.2.2.1 Pathway system co-ordination
C.7.6.2.2.2 Pathway system capacity planning
C.7.6.2.2.3 Pathway systems associated with building entrance pathways
C.7.6.2.2.4 Pathway systems under access floors
C.7.6.2.2.5 Overhead pathway systems
C.7.7 Spaces
C.7.7.1 Requirements
C.7.7.1.1 General
C.7.7.1.2 Equipment rooms
C. 7.7.1.3 Access floors
C.7.7.2 Recommendations
C.7.7.2.1 Equipment rooms
C.7.7.2.2 Access floors
C.7.8 Functional elements
C.7.8.1 Requirements
C.7.8.1.1 Cabinets, frames and racks containing distributors only
C.7.8.1.2 Cabinets, frames and racks containing, or intended to contain, active equipment
C.7.8.2 Recommendations
C.7.8.2.1 Cabinets, frames and racks containing distributors only
C.7.8.2.2 Cabinets, frames and racks containing, or intended to contain, active equipment
C.7.9 Cabling pathway power segregation
C.11 Inspection
C.11.1 Requirements
Annex D
D.1 General
D.7 Installation planning
D.7.5 External service provision
D.7.6 Pathways and pathway systems
D.7.6.1 Requirements
D.7.6.1.1 Pathways
D.7.6.1.2 Pathway systems
D.7.6.1.2.1 Home entrance to primary distribution space
D.7.6.1.2.2 Primary distribution space to secondary distribution space
D.7.6.1.2.3 Primary/secondary distribution space into the home
D.7.6.2 Recommendations
D.7.6.2.2 Pathway systems
D.7.6.2.2.1 Primary/secondary distribution space into the home
D.7.7 Spaces
D.7.7.1 Requirements
D.7.7.1.1 Home entrance
D.7.7.1.2 Primary home distribution
D.7.7.1.3 Secondary home distribution
D.7.7.1.4 Local distribution
D.7.7.1.5 Junction box
D.7.7.2 Recommendations
D.7.7.2.1 Primary home distribution
D.7.7.2.2 Secondary home distribution
D.11 Inspection
D.11.1 Requirements
D.11.2 Recommendations
Annex E
E.1 General
E.5 Specification of installations
E.5.2 Installation specification
E.5.2.2 Recommendations
E.5.2.2.1 Application considerations
E.5.2.2.2 External service provision
E.5.3 Technical specification
E.5.3.4 Performance and configuration
E.5.3.4.2 Recommendation
E.7 Installation planning
E.7.3 Environment
E.7.6 Pathways and pathway systems
E.7.6.1 Requirements
E.7.6.1.2 Pathway systems
E.7.6.2 Recommendations
E.7.6.2.1 Pathways
E.7.6.2.1.1 Pathway co-ordination
E.7.6.2.1.2 Security
E.7.6.2.1.3 Pathway capacity planning
E.7.6.2.1.4 Building entrance pathways
E.7.6.2.2.5 Equipment room pathways
E.7.6.2.3 Pathway systems
E.7.6.2.3.1 Pathway system co-ordination
E.7.6.2.3.2 Pathway system capacity planning
E.7.6.2.3.3 Pathway systems associated with building entrance pathways
E.7.6.2.3.4 Pathway systems under access floors
E.7.6.2.3.4 Overhead pathway systems
E.7.7 Spaces
E.7.7.1 Requirements
E.7.7.1.1 General
E.7.7.1.2 Equipment rooms
E.7.7.1.3 Access floors
E.7.7.2 Recommendations
E.7.7.2.1 Equipment rooms
E.7.7.2.2 Rooms intended to contain distributors
E.7.7.2.3 Access floors
E.7.8 Functional elements
E.7.8.1 Requirements
E.7.8.1.1 Cabinets, frames and racks containing, or intended to contain, active equipment
E.7.8.2 Recommendations
E.7.8.2.1 Cabinets, frames and racks containing distributors only
E.7.8.2.2 Cabinets, frames and racks containing, or intended to contain, active equipment
E.7.9 Segregation of information technology cabling and mains power cabling
E.7.9.2 Recommendations
E.7.11 Equipotential bonding
E.7.11.1 Requirements
E.7.11.2 Recommendations
E.9 Documentation and administration
E.9.2 Recommendations
E.11 Inspection
E.11.1 Requirements
E.11.2 Recommendations
Annex F
F.1 General
F.5 Specification of installations
F.6 Quality planning
F.7 Installation planning
F.8 Installation practices
F.9 Documentation and administration
F.10 Testing
F.11 Inspection
F.13 Maintenance
F.14 Repair
Annex G
Bibliography
Cited references in this standard
Content history
DR AS/NZS ISO/IEC 14763.2

One-time Purchase

Access via web browser on any device
One-time purchase
Single publication
Offline access via PDF^

$156.89 AUD

Inclusive of GST
Format *
iconCreated with Sketch.
Web Reader
Licenses *
iconCreated with Sketch.
1 user
Total$156.89 AUD
Add to Cart
IMPORTANT