Standard
Track updates
AS/NZS ISO 26304:2025
[Current]AS/NZS ISO 26304:2025 identically adopts ISO 26304:2025, which specifies the requirements for classification of solid wire electrodes, tubular cored electrodes, and electrode-flux combinations (the all-weld metal deposits) in the as-welded condition and in the post-weld heat-treated condition for submerged arc welding of high strength steels with a minimum yield strength greater than 500 MPa or a minimum tensile strength greater than 570 MPa.
Published: 08/08/2025
Pages: 20
Table of contents
Cited references
Content history
Table of contents
Header
About this publication
Preface
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
4.1 General
4.2 Classification systems
5 Symbols and requirements
5.1 General
5.2 Symbol for the product or process
5.3 Symbols for the tensile properties of the all-weld metal deposit
5.3.1 Multi-run technique
5.3.2 Two-run technique – system B only
5.4 Symbol for the impact properties of the multi-run or two-run technique
5.5 Symbol for the type of welding flux
5.6 Symbol for the chemical composition of solid wire electrodes and of the all-weld metal from tubular cored electrode-flux combinations
5.7 Symbol for post-weld heat treatment
5.8 Optional symbol for hydrogen content of deposited metal
6 Mechanical tests
6.1 Multi-run technique
6.1.2 Preheating and interpass temperature
6.1.3 Welding conditions and pass sequence
6.2 Two-run technique – system B only
6.2.1
6.2.2
7 Chemical analysis
8 Rounding procedure
9 Retests
10 Technical delivery conditions
11 Examples of designation
11.1 General
11.2 Example 1 – Classification by yield strength and 47 J impact energy – system A
11.3 Example 2 – Classification by tensile strength and 27 J impact energy – system B
11.4 Example 3 – Classification by yield strength and 47 J impact energy – system A
11.5 Example 4 – Classification by tensile strength and 27 J impact energy – system B
11.6 Example 5 – Classification by yield strength and 47 J impact energy – system A
11.7 Example 6 – Classification by tensile strength and 27 J impact energy – system B
11.8 Example 7 – Classification by yield strength and 47 J impact energy – system A
11.9 Example 8 – Classification by tensile strength and 47 J impact energy – system B
Annex A
Bibliography
Cited references in this standard
[Current]
Welding consumables - Technical delivery conditions for filler materials and fluxes - Type of product, dimensions, tolerances and markings
[Current]
Welding and allied processes - Determination of hydrogen content in arc weld metal
[Current]
Welding - Measurement of preheating temperature, interpass temperature and preheat maintenance temperature
[Current]
Welding consumables - Fluxes for submerged arc welding and electroslag welding - Classification
One-time Purchase
Access via web browser on any device
One-time purchase
Single publication
Offline access via PDF^
$149.01 AUD
Inclusive of GSTFormat *
Web Reader
Licenses *
1 License (for yourself - not shareable)
Total$149.01 AUD
IMPORTANT