Standard
Track updates
AS/NZS ISO 11611:2025
[Current]AS/NZS ISO 11611:2025 identically adopts ISO 11611:2024, which specifies minimum safety requirements and test methods for protective clothing
Published: 28/03/2025
Pages: 44
Table of contents
Cited references
Content history
Table of contents
Header
About this publication
Preface
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General and design requirements
4.1 General
4.2 Protective clothing
4.3 Size designation and fit
4.4 Additional protective garments
4.5 Pockets and flap closures
4.6 Closures and seams
4.7 Hardware
5 Sampling and pre-treatment
5.1 Sampling
5.1.1 General
5.1.2 Sampling procedure on fabric materials for the UV transmission measurement
5.1.2.1 Fluorescence
5.1.2.2 Sampling process
5.2 Pre-treatment of material
5.3 Ageing
5.4 Conditioning
6 General performance requirements
6.1 Classification
6.2 Tensile strength
6.3 Tear strength
6.4 Burst strength of knitted materials and seams
6.5 Seam strength
6.6 Dimensional change of textile materials
6.7 Limited flame spread
6.7.1 General
6.7.2 Testing in accordance with ISO 15025:2016, Procedure A (code letter A1)
6.7.2.1
6.7.2.2
6.7.2.3
6.7.2.4
6.7.3 Testing in accordance with ISO 15025:2016, Procedure B (code letter A2)
6.7.3.1
6.7.3.2
6.7.3.3
6.8 Impact of spatter (small splashes of molten metal)
6.9 Heat transfer (radiation)
6.10 Electrical resistance
6.11 Fat content of leather
6.12 Protection against UV radiation
6.13 Performance requirements
7 Marking
7.1 General
7.2 Procedure and examples of markings:
8 Information supplied by the manufacturer
8.1 General
8.2 Intended use
8.3 Improper use
8.4 Care and maintenance
9 Test report
Annex A
Annex B
Annex C
Annex D
D.1 General
D.1.1 Option 1 “inexperienced user”: Table with examples of calculations on the basis of exemplary values:
D.1.1.1 Maximum time of operation
D.1.2 Option 2 „experienced user“: Table with calculation samples using actually measured values:
Annex E
Annex F
Annex G
Annex H
H.1 General
H.2 Expression of results
H.3 Outlying data
H.4 Uncertainty of measurement
H.5 Classification of results
Annex I
I.1 Summary of RRT 1
I.2 Summary of RRT 2
I.3 Summary of RRT 3
I.4 Summary of RRT 4
I.5 Summary of RRT 5
Bibliography
Cited references in this standard
[Current]
Leather - Physical and mechanical tests - Determination of tensile strength and percentage elongation
[Current]
Leather - Physical and mechanical tests - Determination of tear load - Part 1: Single edge tear
[Current]
Leather - Chemical tests - Determination of matter soluble in dichloromethane and free fatty acid content
[Current]
Protective clothing - Protection against heat and fire - Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat