Standard
UPDATE AVAILABLE
AS/NZS ISO 10535:2011
[Superseded]Adopts ISO 10535:2006 to specify requirements and test methods for hoists and body-support units intended for the transfer of disabled persons as classified in AS/NZS ISO 9999.
Published: 20/12/2011
Pages: 48
Table of contents
Cited references
Content history
Table of contents
Header
About this publication
Preface
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements and test methods
4.1 General requirements
4.1.1 Risk analysis
4.1.2 Ergonomic factors
4.1.3 Noise
4.2 General test methods
4.2.1 Test conditions
4.2.2 Test equipment
4.2.2.1
4.2.2.2
4.2.2.3
4.2.2.4
4.2.2.5
4.2.2.6
4.2.2.7
4.2.2.8
4.2.2.9
4.2.3 Permissible errors of test equipment
4.2.4 Test report
4.3 Safety requirements
4.3.1 Safety and performance requirements
4.3.1.1
4.3.1.2
4.3.1.3
4.3.1.4
4.3.1.5
4.3.1.6
4.3.1.7
4.3.1.8
4.3.1.9
4.3.1.10
4.3.1.11
4.3.1.12
4.3.1.13
4.3.1.14
4.3.1.15
4.3.1.16
4.3.1.17
4.3.1.18
4.3.1.19
4.3.1.20
4.3.1.21
4.3.1.22
4.3.1.23
4.3.1.24
4.3.1.25
4.3.1.26
4.3.2 Test methods for general safety requirements
4.3.2.1
4.3.2.2
4.3.2.3
4.3.2.4
4.3.2.5
4.3.2.6
4.3.2.7
4.3.2.8
4.3.2.9
4.3.2.10
4.3.2.11
4.3.2.12
4.3.2.13
4.3.2.14
4.3.2.15
4.3.2.16
4.3.2.17
4.3.2.18
4.3.2.19
4.3.2.20
4.3.2.21
4.3.2.22
4.3.2.23
4.3.2.24
4.3.2.25
4.3.2.26
4.4 Requirements for body-support units
4.5 Central suspension point
4.5.1 Requirements for central suspension point
4.5.2 Test method for the central suspension point
4.6 Spreader bar
4.6.1 Requirements for spreader bar
4.6.1.1
4.6.1.2
4.6.1.3
4.6.1.4
4.6.2 Test methods for the spreader bar
4.6.2.1
4.6.2.2
4.6.2.3
4.6.2.4
4.7 Performance
4.7.1 Requirements for performance
4.7.1.1
4.7.1.2
4.7.1.3
4.7.2 Test methods for performance
4.7.2.1
4.7.2.2
4.7.2.3
4.8 Rate (velocity) of lifting and lowering
4.8.1 Requirements for rate (velocity) of lifting and lowering
4.8.1.1
4.8.1.2
4.8.2 Test methods for rate (velocity) of lifting and lowering
4.8.2.1
4.8.2.2
4.9 Operating forces/torques
4.9.1 Requirements for operating forces/torques
4.9.2 Test methods for operating forces/torques
4.10 Durability
4.10.1 Requirements for durability
4.10.2 Test methods for durability
4.10.2.1
4.10.2.2
4.10.2.3
4.10.2.4
4.10.2.5
4.10.2.6
4.10.2.7
4.10.2.8
4.10.2.9
4.11 Hydraulic components
4.11.1 Requirements for hydraulic components
4.11.1.1
4.11.1.2
4.11.1.3
4.11.1.4
4.11.1.5
4.11.1.6
4.11.1.7
4.11.2 Test methods for hydraulic components
4.11.2.1
4.11.2.2
4.12 Pneumatic components
4.12.1 Requirements for pneumatic components
4.12.1.1
4.12.1.2
4.12.1.3
4.12.2 Test methods for pneumatic components
4.12.2.1
4.12.2.2
4.12.2.3
4.13 Information supplied by the manufacturer
4.13.1 General
4.13.2 Marking
4.13.3 Instructions for use
5 Mobile hoists — Specific requirements and test methods
5.1 General requirements
5.2 Static strength
5.2.1 Requirements for static strength
5.2.2 Test methods for static strength
5.3 Static stability
5.3.1 Requirements for static stability
5.3.2 Test methods for static stability
5.3.2.1 Test procedures for 5.3.1 a), b) and c)
5.3.2.2 Unloaded
5.3.2.3 Loaded
5.4 Immobilizing device (brakes)
5.4.1 Requirements for immobilizing device (brakes)
5.4.2 Test methods for immobilizing device (brakes)
5.5 Moving forces
5.5.1 Requirements for moving forces
5.5.2 Test methods for moving forces
5.6 Instructions for use
6 Standing and/or raising hoists — Specific requirements and test methods
6.1 General requirements
6.2 Static strength
6.2.1 Requirements for static strength
6.2.2 Test method for static strength
6.3 Static stability
6.3.1 Requirements for static stability
6.3.2 Test methods for static stability
6.3.2.1 Test procedures for 6.3.1 a), b) and c)
6.3.2.2 Unloaded
6.3.2.3 Loaded (backwards stability)
6.3.2.4 Loaded (forwards stability)
6.3.2.5 Loaded (sideways stability)
6.4 Immobilizing device (brakes)
6.4.1 Requirements for immobilizing device (brakes)
6.4.2 Test methods for immobilizing device (brakes)
6.5 Moving forces
6.5.1 Requirements for moving forces
6.5.2 Test methods for moving forces
6.6 Durability
6.6.1 Requirements for durability
6.6.2 Test methods for durability
6.6.2.1
6.6.2.2
6.6.2.3
6.6.2.4
6.6.2.5
6.6.2.6
6.6.2.7
6.6.2.8
6.7 Instructions for use
7 Stationary hoists — Specific requirements and test methods
7.1 General requirements
7.2 Specific safety requirements
7.2.1 Requirements for specific safety requirements
7.2.1.1
7.2.1.2
7.2.1.3
7.2.1.4
7.2.1.5
7.2.1.6
7.2.2 Test methods for specific safety requirements
7.2.2.1
7.2.2.2
7.2.2.3
7.2.2.4
7.2.2.5
7.2.2.6
7.3 Static strength (free-standing stationary hoists only)
7.3.1 Requirements for static strength (free-standing stationary hoists only)
7.3.2 Test methods for static strength (free-standing stationary hoists only)
7.4 Static stability (free-standing stationary hoists only)
7.4.1 Requirements for static stability (free-standing stationary hoists only)
7.4.2 Test methods for static stability (free-standing stationary hoists only)
7.4.2.1 Positioning
7.4.2.1.1 General
7.4.2.1.2 Unloaded
7.4.2.1.3 Loaded
7.5 Static strength for all other stationary hoists
7.5.1 Requirements for static strength for all other stationary hoists
7.5.2 Test methods for static strength for all other stationary hoists
7.6 Instructions for use
8 Non-rigid body-support units — Specific requirements and test methods
8.1 General requirements
8.2 Requirements for material and seams of the non-rigid body-support unit
8.2.1
8.2.2
8.3 Test methods for non-rigid body-support unit
8.4 Information supplied by the manufacturer
8.4.1 Marking
8.4.2 Instructions for use
9 Rigid body-support units — Specific requirements and test methods
9.1 General requirements
9.2 Requirements for backrest
9.3 Requirements and test methods for durability
9.4 Information supplied by the manufacturer
9.4.1 Marking
9.4.2 Instructions for use
10 Bathtub hoists — Specific requirements and test methods
10.1 General requirements
10.1.1 General
10.1.2 Risk analysis
10.1.3 Ergonomic factors
10.1.3.1
10.1.3.2
10.1.3.3
10.1.4 Noise
10.2 General test methods
10.2.1 Test conditions
10.2.2 Test equipment
10.2.2.1
10.2.2.2
10.2.2.3
10.2.2.4
10.2.2.5
10.2.3 Permissible errors of test equipment
10.2.4 Test report
10.3 Safety requirements
10.3.1 General safety requirements
10.3.1.1
10.3.1.2
10.3.1.3
10.3.1.4
10.3.2 Test methods for general safety requirements
10.3.2.1
10.3.2.2
10.3.2.3
10.4 Body-support units
10.5 Spreader bar
10.6 Performance
10.7 Rate (velocity) of lifting and lowering
10.8 Operating forces
10.9 Durability
10.9.1 Requirements for durability
10.9.2 Test methods for durability
10.9.2.1
10.9.2.2
10.9.2.3
10.9.2.4
10.9.2.5
10.9.2.6
10.10 Static strength and stability
10.10.1 Requirements for static strength and stability
10.10.1.1
10.10.1.2
10.10.1.3
10.10.2 Test methods for static strength and stability
10.10.2.1
10.10.2.2
10.10.2.3
10.11 Hydraulic components
10.12 Pneumatic components
10.13 Specific safety requirements
10.13.1 Requirements for specific safety requirements
10.13.2 Test methods for specific safety requirements
10.14 Non-rigid body-support units
10.15 Rigid body-support units — Requirements
10.16 Information supplied by the manufacturer
10.16.1 General
10.16.2 Marking
10.16.3 Instructions for use
Annex A
Annex B
B.1
B.2
B.3
B.4
B.5
B.6
B.7
B.8
B.9
B.10
B.11
Cited references in this standard
Content history
[Current]
[Superseded]
[Superseded]
DR AS/NZS ISO 10535
One-time Purchase
Access via web browser on any device
One-time purchase
Single publication
Offline access via PDF^
$170.80 AUD
Inclusive of GSTFormat *
Web Reader
Licenses *
1 License (for yourself - not shareable)
Total$170.80 AUD
IMPORTANT