Standard
Track updates
AS/NZS 4692.2:2005
[Current]Electric water heaters, Part 2: Minimum Energy Performance Standard (MEPS) requirements and energy labelling
Specifies the Minimum Energy Performance Standards (MEPS) requirements for various water heaters within the scope of AS/NZS 4692.1.
Published: 14/09/2005
Pages: 34
Table of contents
Cited references
Content history
Table of contents
Header
About this publication
Preface
1 Scope and general
1.1 Scope
1.2 Application
1.3 Objective
1.4 Exclusions
1.5 Referenced documents
1.6 Definitions
1.7 Measured quantities
1.8 Rounding
2 Performance criteria
2.1 General
2.2 Minimum Energy Performance Standards
2.2.1 Unvented displacement water heaters—Australia
2.2.1.1 General
2.2.1.2 Rated hot water delivery
2.2.1.3 Maximum allowable heat loss
2.2.2 Vented electric storage water heater types—Australia
2.2.2.1 General
2.2.2.2 Rated hot water delivery
2.2.2.3 Maximum allowable heat loss
2.2.3 Electric heat exchange water heaters—Australia
2.2.3.1 General
2.2.3.2 Heat storage volume
2.2.3.3 Maximum allowable heat loss
2.2.4 Electric storage water heaters — New Zealand
2.2.4.1 General
2.2.4.2 Storage capacity
2.2.4.3 Maximum allowable heat loss
2.3 Maximum heat loss targets
2.3.1 General
2.3.2 Electric vented storage water heater types—Australia
2.3.2.1 General
2.3.2.2 Rated hot water delivery
2.3.2.3 Maximum allowable heat loss
2.3.3 Heat exchange water heaters—Australia
2.3.3.1 General
2.3.3.2 Heat storage volume
2.3.3.3 Maximum allowable heat loss
2.4 Rated mixed hot water delivery
2.5 Modelling of energy consumption
2.6 Deemed to comply options
2.7 MEPS validity (check-testing)
2.8 Energy labeling
3 Application and test result formats
3.1 Application for registration
3.1.1 General
3.1.2 Registration
3.1.3 Report format
3.1.4 MEPS transition
3.2 Listing and holding of records
3.2.1 General
3.2.2 Data
3.2.3 Test report
3.2.4 Availability
Appendix A
A1 Introduction
A2 Unvented displacement water heaters—Australia
A2.1 MEPS for unvented displacement water heaters tested to AS/NZS 4692.1
A2.2 MEPS for unvented displacement water heaters tested to AS 1056.1
A3 Vented displacement water heaters—Australia
A3.1 MEPS for vented displacement water heaters tested to AS/NZS 4692.1
A3.2 MEPS for vented displacement water heaters tested to AS 1056.1
A3.3 Maximum heat loss targets for vented displacement water heaters tested to AS/NZS 4692.1
A3.4 Maximum heat loss targets for vented displacement water heaters tested to AS 1056.1
A4 Heat exchange water heaters—Australia
A4.1 MEPS for heat exchange water heaters tested to AS/NZS 4692.1
A4.2 MEPS for heat exchange water heaters tested to AS 1361
A4.3 Maximum heat loss targets for heat exchange water heaters tested to AS/NZS 4692.1
A4.4 Maximum heat loss targets for heat exchange water heaters tested to AS 1361
A5 Electric storage water heaters—New Zealand
A5.1 MEPS for electric storage water heaters tested to AS/NZS 4692.1
A5.2 MEPS for electric storage water heaters tested to NZS 4602 or NZS 4606.1
Appendix B
B1 Scope
B2 Guidance on the use of this application form
B3 Submissions to the New Zealand regulator
Appendix C
Appendix D
Appendix E
Appendix F
Appendix G
Appendix H
H1 Top energy saver award winner—Australia
H1.1 Background
H1.2 Applying for TESAW
Cited references in this standard
NZS 4606.1
Storage water heaters, Part 1: General requirements
NZS 4602
Low pressure copper thermal storage electric water heaters
[Current]
Electric water heaters, Part 1: Energy consumption, performance and general requirements
[Available Superseded]
Solar water heaters - Domestic and heat pump - Calculation of energy consumption
Content history
DR 04389
AS/NZS 4692.2:2005 Rec:2016
One-time Purchase
Access via web browser on any device
One-time purchase
Single publication
Offline access via PDF^
$141.91 AUD
Inclusive of GSTFormat *
Web Reader
Licenses *
1 user
Total$141.91 AUD
IMPORTANT