Standard
UPDATE AVAILABLE

AS/NZS 3497:1998

[Superseded]

Drinking water treatment units — Plumbing requirements

Specifies requirements for the construction, installation and testing of drinking water treatment units and equipment, or appliances, or both, designed for domestic type applications under Australian and New Zealand climatic conditions, but does not preclude their use for commercial or industrial applications. These appliances are designed to be used for the reduction of specific groups of contaminants from a drinking water supply (public or private), such contaminants being specified by the manufacturer or reseller of the appliances. The Standard establishes minimum requirements for point of use (POU), point of entry (POE) and stand-alone appliances.
Published: 05/07/1998
Pages: 19
Table of contents
Cited references
Content history
Table of contents
Header
About this publication
PREFACE
1 SCOPE AND GENERAL
1.1 SCOPE
1.2 APPLICATION
1.3 REFERENCED DOCUMENTS
1.4 DEFINITIONS
2 INSTALLATION, MARKING AND LABELLING
2.1 INSTALLATION INSTRUCTIONS
2.2 OPERATION AND MAINTENANCE INSTRUCTIONS
2.3 MARKING REQUIREMENTS
2.3.1 General
2.3.2 Housing only
2.3.3 Appliances or systems
2.4 PERFORMANCE DATA SHEET
2.5 LABELLING
3 MATERIALS
3.1 GENERAL
3.2 CONTAMINATION OF WATER
3.2.1 General
3.2.2 Ion exchange and synthetic absorbent resins
3.3 METALLIC MATERIALS
3.4 PLASTIC MATERIALS
4 COMMON DESIGN
4.1 GENERAL
4.2 DESIGN
4.2.1 Classes of domestic drinking-water appliances
4.3 WORKING PRESSURE/TEMPERATURE
4.4 PERFORMANCE INDICATION
4.5 CONSUMABLES (see Clause 1.4.5)
4.6 FLOW CONTROL
4.7 CONNECTIONS
4.8 BACKFLOW PREVENTION
4.9 POSITIVE SEAL
4.10 PRESSURE CONTROL VALVE
4.11 DISPENSING OUTLETS
5 TESTS
5.1 GENERAL
5.2 HYDROSTATIC TEST
5.3 ENDURANCE TEST
5.4 BURST PRESSURE
5.5 STRUCTURAL INTEGRITY (Pressure vessels above 203 mm diameter)
5.6 COMPONENT TESTS
6 RECOGNITION OF ANSI/NSF STANDARDS
APPENDIX A
APPENDIX B
B1 SCOPE
B2 GENERAL
B3 ACETAL COPOLYMER
B4 UV RESISTANCE
APPENDIX C
Cited references in this standard
AS 4158
Thermal-bonded polymeric coatings on valves and fittings for water industry purposes
ANSI/NSF 58
Reverse osmosis drinking water treatment units
[Current]
Pressure vessels
[Current]
Aluminium and aluminium alloys — Ingots and castings
[Current]
Dezincification resistance of copper alloys
Content history
[Current]
[Superseded]
96331

One-time Purchase

Access via web browser on any device
One-time purchase
Single publication
Offline access via PDF^

$83.52 AUD

Inclusive of GST
Format *
iconCreated with Sketch.
Web Reader
Licenses *
iconCreated with Sketch.
1 user
Total$83.52 AUD
Add to Cart
IMPORTANT