Standard
UPDATE AVAILABLE
AS/NZS 3120:2011
[Superseded]Approval and test specification - Cord extension sockets
Specifies essential safety requirements for cord extension sockets intended to be used at extra-low voltages. This Standard is to be read in conjunction with AS/NZS 3100.
Published: 29/08/2011
Pages: 21
Table of contents
Cited references
Content history
Table of contents
Header
About this publication
Preface
1 Scope and general
1.1 Scope
1.2 Application
1.2.1 General requirements of AS/NZS 3100
1.2.2 Specific requirements of this Standard
1.3 Referenced documents
1.4 Definitions
2 Cord extension sockets
2.1 General
2.2 Exemptions for extra-low voltage sockets
2.3 Limitation of outlets
2.4 Terminals and internal connections
2.4.1 Material
2.4.2 Construction of terminals
2.5 Contacts
2.5.1 Material
2.5.2 Construction
2.5.3 Depth of contacts
2.6 Dimensions
2.6.1 Pin entry apertures for flat-pin plugs
2.6.2 Socket face projection
2.6.2.1 Socket face of sockets rated at 10 A and 15 A
2.6.2.2 Configurations covered∗
2.6.3 Socket face of sockets rated at 15 A†
2.7 Arrangement of earthing connections
2.8 Insulating materials
2.9 Attachment of covers
2.10 External shape
2.10.1 General
2.10.1.1 10 A and 15 A sockets with 360° projection
2.10.1.2 15 A and 20 A sockets without a 360° projection
2.10.2 Pendant type sockets
2.10.3 Other than pendant type sockets
2.10.4 Finger grip
2.11 Exposed metal
2.12 Means of entry and cord anchorage for flexible cord
2.13 Ratings
2.13.1 Voltage rating
2.13.2 Current rating
2.14 Internal connections
2.15 Prevention of contact with live pins
2.15.1 Assembly
2.15.2 During normal insertion
2.15.3 During other than normal insertion
2.16 Fuses
2.17 Switches
2.18 Marking
2.18.1 Required marking
2.18.2 Location of marking
2.18.3 Additional requirements for rewirable sockets
2.18.4 Earthing connections
2.18.5 Live connections
2.18.5.1 General
2.18.5.2 Location of marking
2.18.6 Configuration of sockets intended for flat-pin plugs
2.19 Tests
2.19.1 General
2.19.2 Withdrawal force test
2.19.3 Tumbling barrel test
2.19.4 Insulation resistance test No. 1
2.19.5 High voltage test
2.19.6 Current breaking test
2.19.7 Test of temperature rise
2.19.8 Insulation resistance test No. 2
2.19.9 Flexible cord anchorage test
2.19.10 Test of earthing connection
2.19.11 Test for attachment of covers
2.19.12 Test for the fixing of contacts in resilient or thermoplastic sockets
2.19.13 Additional tests for non-rewirable sockets
3 Inlet plug
3.1 General
3.2 Standard ratings
3.3 Marking
3.4 Dimensions and compatibility
3.5 Construction
3.5.1 Inlet plugs
3.5.2 Terminals
3.5.3 Mechanical strength
3.6 Parts providing protection
3.7 Resistance to heat
3.8 Screws, current-carrying parts and connections
3.9 Tests on inlet plugs
3.9.1 General
3.9.2 Insulation resistance test
3.9.3 High voltage test
3.9.4 Cover operating test
3.9.5 Determination of ignitability and combustion propagation
Amendment control sheet
AS/NZS 3120:2011
Amendment No. 1 (2012)
Correction
Cited references in this standard
[Current]
Approval and test specification - Plugs, socket-outlets and couplers for general industrial application
[Current]
Appliance couplers for household and similar general purposes, Part 1: General requirements (IEC 60320-1:2015 (ED. 3.1) MOD)
Content history
[Current]
[Superseded]
[Superseded]
DR AS/NZS 3120
One-time Purchase
Access via web browser on any device
One-time purchase
Single publication
Offline access via PDF^
$95.34 AUD
Inclusive of GSTFormat *
Web Reader
Licenses *
1 user
Total$95.34 AUD
IMPORTANT