Standard
UPDATE AVAILABLE
Track updates
AS/NZS 2638.1:2011
[Current]Gate valves for waterworks purposes, Part 1: Metal seated
Specifies requirements for PN 16 and PN 35 solid gate metal-bodied metal-seated gate valves for waterworks purposes, with a maximum operating temperature of 40 degrees Celsius.
Published: 27/05/2011
Pages: 31
Table of contents
Cited references
Content history
Table of contents
Header
4 Coatings
4.1 General
4.2 Design
About this publication
5 Testing
5.1 Type tests
5.1.1 General
5.1.2 Strength test (spindle, thrust collar, nut and cap) (Test A)
5.1.3 Body pressure test (Test B)
5.1.4 Gate strength test (Test C)
5.1.5 Torque test (Test D)
5.1.6 Valve seat test (Test E)
5.1.7 Sensitivity test (Test F)
5.1.8 Functional test (Test G)
5.1.9 Spindle seal replacement or repair test (Test H)
5.1.10 Final inspection
5.1.11 Strength test (valve key) (Test I)
5.1.12 Strength test (spindle extension) (Test J)
5.2 Production tests
5.2.1 General
5.2.2 Body test (Test 1)
5.2.3 Valve seat test (Test 2)
5.2.4 Coating tests
Preface
6 Gearboxes
6.1 Design
6.1.1 Gearbox
6.1.2 Gearbox selection
6.1.3 Geared valves
6.2 Coatings
6.3 Marking
1 Scope and general
1.1 Scope
1.2 Application
1.3 Normative references
1.4 Definitions
1.5 Designation of size
1.6 Allowable pressures
7 Marking and packaging
7.1 Body marking
7.2 Valve key and spindle extension marking
7.3 Direction of closure marking for handwheels and caps
7.4 Packaging
2 Materials and components
2.1 Materials
2.2 Copper alloy components
2.3 Contamination of water
2.4 Seals
Appendix A
A1 Scope
A2 Relevance
A3 Testing
A3.1 General
A3.2 Testing
A3.3 Retesting
3 Design
3.1 General
3.2 Dimensions
3.3 End connections
3.3.1 General
3.3.2 Flanged ends
3.3.3 Socket ends
3.3.4 Spigot ends
3.3.5 Shouldered or grooved ends
3.4 Gate
3.4.1 Gate guides
3.4.2 Gate travel
3.5 Component jointing
3.5.1 Connections
3.5.2 Fasteners
3.6 Waterway
3.6.1 Waterway
3.6.2 Metal rings
3.7 Spindle
3.7.1 Spindle diameter
3.7.2 Spindle thread
3.7.3 Spindle sealing
3.7.4 Thrust collar
3.7.5 Spindle seal retainer
3.8 Operation
3.8.1 General
3.8.2 Spindle cap and key
3.8.3 Extension spindle
3.8.4 Handwheels
3.8.5 Direction of closure
3.9 Lifting devices
3.10 Support feet
Appendix B
B1 General
B2 Information to be supplied by the purchaser
B3 Information to be supplied by the manufacturer
B4 Matters for agreement between the purchaser and the manufacturer
Appendix C
Appendix D
D1 General
D2 Information required for gearbox selection
D3 Torque requirements of a valve
D3.1 General
D3.2 Cracking torque
D3.3 Running torque
D4 Standard gearbox ratios
D5 Gearbox ratio selection
D6 Final check
Amendment control sheet
AS/NZS 2638.1:2011
Amendment No. 1 (2017)
Revised text
Cited references in this standard
EN 12420
Copper and copper alloys—Forgings
DIN 103
ISO Metric Trapezoidal Screw Thread; Profiles
Content history
[Current]
[Superseded]
DR AS/NZS 2638.1
AS/NZS 2638.1:2011 REC:2022
One-time Purchase
Access via web browser on any device
One-time purchase
Single publication
Offline access via PDF^
$141.91 AUD
Inclusive of GSTFormat *
Web Reader
Licenses *
1 user
Total$141.91 AUD
IMPORTANT