Standard
UPDATE AVAILABLE
Track updates
AS/NZS 2271:2004
[Current]Plywood and blockboard for exterior use
Specifies the requirements for the manufacture, grading, finishing and branding of an appearance grade of non-structural plywood and non-structural blockboard bonded with adhesives of suitable durability for use in applications where the product is exposed to the weather or wet or damp conditions.
Published: 24/03/2004
Pages: 16
Table of contents
Cited references
Content history
Table of contents
Header
About this publication
Preface
1 Scope and general
1.1 Scope
1.2 Application
1.3 Referenced documents
1.4 Definitions
1.5 Grades of plywood and blockboard for exterior use
1.6 Dimensions and shape
1.6.1 Dimensions
1.6.2 Shape
1.7 Moisture content
1.8 Finish
1.9 Joints in sheets
1.10 Immunization and preservative treatment
1.10.1 Immunization of lyctid-susceptible sapwood
1.10.2 Preservative treatment
1.11 Formaldehyde emission classes
1.12 Branding
2 Requirements for veneers and core strips
2.1 General requirements for all face and back veneers
2.2 Quality A veneer
2.2.1 General
2.2.2 Non-permitted imperfections
2.2.3 Permitted imperfections
2.3 Quality S veneer
2.4 Quality B veneer
2.4.1 General
2.4.2 Non-permitted imperfections
2.4.3 Permitted imperfections
2.5 Quality C veneer
2.5.1 General
2.5.2 Non-permitted imperfections
2.5.3 Permitted imperfections
2.6 Quality D veneer
2.6.1 General
2.6.2 Permitted imperfections
2.7 Core veneers
2.8 Core strips
2.8.1 Species for core strips
2.8.2 Size and quality of core strips
2.8.3 Thickness of core strips
2.8.4 Finish of core strips
2.8.5 Moisture content of core strips
2.8.6 Assembly of core strips
3 Manufacturing requirements
3.1 Joints in veneers
3.1.1 End joints
3.1.2 Edge joints
3.2 Joints in plywood and blockboard sheets
3.3 Bonding between plies
3.4 Assembly of plywood
3.4.1 Construction
3.4.2 Lay-up of plies
3.5 Assembly of blockboard
3.5.1 Construction
3.5.2 Thickness of plies in the sheet
3.5.3 Lay-up of plies
Appendix A
Appendix B
Cited references in this standard
NZ/MP 3640
Specification of the minimum requirements of the NZ Timber Preservation Council Inc.
[Current]
Methods of test for veneer and plywood, Method 4: Measurement of dimensions and shape for sheets of veneer and plywood
[Current]
Methods of test for veneer and plywood, Method 3: Bond quality and strength of scarf joints in plywood
[Current]
Methods of test for veneer and plywood, Method 2: Bond quality of plywood (chisel test)
Content history
[Current]
[Superseded]
AS/NZS 2271:2004 Rec:2016
DR 03191
One-time Purchase
Access via web browser on any device
One-time purchase
Single publication
Offline access via PDF^
$104.71 AUD
Inclusive of GSTFormat *
Web Reader
Licenses *
1 user
Total$104.71 AUD
IMPORTANT