Standard
UPDATE AVAILABLE
Track updates
AS/NZS 2270:2006
[Current]Plywood and blockboard for interior use
Provides minimum performance requirements and specifications for appearance and non-appearance grades of plywood and blockboard acceptable for use in fully protected interior applications in Australia and New Zealand. Describes the basic interior plywood and blockboard product. Particular end uses may require additional processing, immunization or surface finishing.
Published: 21/11/2006
Pages: 16
Table of contents
Cited references
Content history
Table of contents
Header
About this publication
Preface
1 Scope and general
1.1 Scope
1.2 Application
1.3 Referenced documents
1.4 Definitions
1.5 Grades of plywood and blockboard for interior use
1.6 Dimensions and shape
1.6.1 Dimensions
1.6.2 Shape
1.7 Moisture content
1.8 Finish
1.9 Joints in sheets
1.10 Immunization of lyctid-susceptible sapwood
1.11 Formaldehyde emission class
1.12 Branding
2 Requirements for veneers and core strips
2.1 General requirements for all face and back veneers
2.2 Quality A veneer
2.2.1 General
2.2.2 Non-permitted imperfections
2.2.3 Permitted imperfections
2.3 Quality S veneer
2.4 Quality B veneer
2.4.1 General
2.4.2 Non-permitted imperfections
2.4.3 Permitted imperfections
2.5 Quality C veneer
2.5.1 General
2.5.2 Non-permitted imperfections
2.5.3 Permitted imperfections
2.6 Quality D veneer
2.6.1 General
2.6.2 Permitted imperfections
2.7 Core veneers
2.8 Core strips (blockboard)
2.8.1 Species for core strips
2.8.2 Size and quality of core strips
2.8.3 Thickness of core strips
2.8.4 Finish of core strips
2.8.5 Moisture content of core strips
2.8.6 Assembly of core strips
3 Manufacturing requirements
3.1 Joints in veneers
3.1.1 End Joints
3.1.2 Edge joints
3.2 Joints in plywood and blockboard sheets
3.3 Bonding between plies
3.4 Assembly of plywood
3.4.1 Construction
3.4.2 Lay-up of plies
3.5 Assembly of blockboard
3.5.1 Construction
3.5.2 Thickness of plies in the sheet
3.6 Storage and handling
Appendix A
Appendix B
Amendment control sheet
AS/NZS 2270:2006
Amendment No. 1 (2007)
Revised text
Cited references in this standard
[Current]
Methods of test for veneer and plywood, Method 11: Determination of formaldehyde emissions for plywood
[Current]
Methods of test for veneer and plywood, Method 4: Measurement of dimensions and shape for sheets of veneer and plywood
[Current]
Methods of test for veneer and plywood, Method 3: Bond quality and strength of scarf joints in plywood
[Current]
Methods of test for veneer and plywood, Method 2: Bond quality of plywood (chisel test)
Content history
[Current]
[Superseded]
DR 06375
AS/NZS 2270:2006 Rec:2016
One-time Purchase
Access via web browser on any device
One-time purchase
Single publication
Offline access via PDF^
$104.71 AUD
Inclusive of GSTFormat *
Web Reader
Licenses *
1 user
Total$104.71 AUD
IMPORTANT