Standard

Track updates

AS ISO 7240.11:2018

[Current]

Fire detection and alarm systems, Part 11: Manual Call Points

The objective of this Standard is to specify the requirements, test methods and performance criteria for manual call points in fire detection and alarm systems in and around buildings (refer to AS ISO 7240‑1).

Published: 20/12/2018

Pages: 39

Table of contents

Cited references

Content history

Table of contents

Header

About this publication

Preface

Foreword

Introduction

1 Scope

2 Normative references

3 Terms and definitions

4 Requirements

4.1 Compliance

4.2 Marking and data

4.2.1 Marking

4.2.1.1

4.2.1.2

4.2.1.3

4.2.1.4

4.2.2 Data

4.2.2.1

4.2.2.2

4.2.2.3

4.3 Frangible element

4.3.1 Normal condition

4.3.2 Alarm condition

4.3.2.1

4.3.2.2

4.4 Indicators for alarm condition

4.4.1

4.4.2

4.4.3

4.5 Reset facility

4.5.1

4.5.2

4.6 Test facility

4.6.1

4.6.2

4.7 Construction and design

4.7.1 Safety

4.7.1.1

4.7.1.2

4.7.1.3

4.7.2 Shape, dimensions and colours

4.7.2.1 Shape

4.7.2.1.1

4.7.2.1.2

4.7.2.2 Dimensions

4.7.2.2.1

4.7.2.2.2

4.7.2.2.3

4.7.2.2.4

4.7.2.3 Colours

4.7.2.3.1

4.7.2.3.2

4.7.2.3.3

4.7.3 Symbols and lettering

4.7.3.1 General

4.7.3.2 Symbols and lettering on the front face

4.7.3.2.1

4.7.3.2.2

4.7.3.3 Symbols and lettering on the operating face

4.7.3.3.1

4.7.3.3.2

4.7.4 Protection against accidental operation

4.7.4.1

4.7.4.2

4.7.4.3

4.7.5 Environment category

4.7.5.1

4.7.5.2

4.8 Requirements for software controlled manual call points

4.8.1 General

4.8.2 Software documentation

4.8.2.1

4.8.2.2

4.8.3 Software design

4.8.4 The storage of programs and data

4.8.4.1

4.8.4.2

5 Tests

5.1 General

5.1.1 Atmospheric conditions for tests

5.1.1.1

5.1.1.2

5.1.2 Operating conditions for tests

5.1.2.1

5.1.2.2

5.1.3 Mounting arrangements

5.1.4 Tolerances

5.1.4.1

5.1.4.2

5.1.5 Measurement of response time

5.1.5.1

5.1.5.2

5.1.6 Provisions for tests

5.1.6.1

5.1.6.2

5.1.7 Test schedule

5.1.7.1

5.1.7.2

5.1.7.3

5.2 Operational performance

5.2.1 Object of test

5.2.2 Test procedure

5.2.2.1 Test for non-operation

5.2.2.1.1 State of the specimen during test

5.2.2.1.2 Initial state

5.2.2.1.3 Conditioning

5.2.2.1.3.1

5.2.2.1.3.2

5.2.2.1.3.3

5.2.2.1.4 Measurements during testing

5.2.2.1.5 Final measurements

5.2.2.2 Test for operation

5.2.2.2.1 Conditioning

5.2.2.2.1.1

5.2.2.2.1.2

5.2.2.2.2 State of the specimen during test

5.2.2.2.3 Initial state

5.2.2.2.4 Resetting

5.2.2.2.5 Measurements during testing

5.2.3 Requirements

5.2.3.1

5.2.3.2

5.2.3.3

5.3 Function test

5.3.1 Object of test

5.3.2 Test procedure

5.3.2.1

5.3.2.2

5.3.3 Requirements

5.4 Test facility test (operational)

5.4.1 Object of test

5.4.2 Test procedure

5.4.2.1 General

5.4.2.2 State of the specimen during test

5.4.2.3 Measurements during testing

5.4.3 Requirements

5.4.3.1

5.4.3.2

5.4.3.3

5.5 Reliability (endurance)

5.5.1 Object of test

5.5.2 Test procedure

5.5.2.1 Test apparatus

5.5.2.2 State of the specimen during conditioning

5.5.2.3 Conditioning

5.5.2.4 Final measurements

5.5.2.4.1

5.5.2.4.2

5.5.3 Requirements

5.5.3.1

5.5.3.2

5.6 Variation of supply parameters

5.6.1 Object of test

5.6.2 Test procedure

5.6.2.1 State of the specimen during conditioning

5.6.2.2 Conditioning

5.6.2.3 Measurements during conditioning

5.6.2.3.1

5.6.2.3.2

5.6.2.3.3

5.6.3 Requirements

5.6.3.1

5.6.3.2

5.6.3.3

5.7 Dry heat (operational)

5.7.1 Object of test

5.7.2 Test procedure

5.7.2.1 Reference

5.7.2.2 State of the specimen during conditioning

5.7.2.3 Conditioning

5.7.2.4 Measurements during conditioning

5.7.2.4.1

5.7.2.4.2

5.7.2.5 Final measurements

5.7.2.5.1

5.7.2.5.2

5.7.3 Requirements

5.7.3.1

5.7.3.2

5.7.3.3

5.8 Dry heat (endurance)

5.8.1 Object of test

5.8.2 Test procedure

5.8.2.1 Reference

5.8.2.2 State of the specimen during conditioning

5.8.2.3 Conditioning

5.8.2.4 Final measurements

5.8.3 Requirements

5.8.3.1

5.8.3.2

5.9 Cold (operational)

5.9.1 Object of test

5.9.2 Test procedure

5.9.2.1 Reference

5.9.2.2 State of the specimen during conditioning

5.9.2.3 Conditioning

5.9.2.4 Measurements during conditioning

5.9.2.4.1

5.9.2.4.2

5.9.2.5 Final measurements

5.9.3 Requirements

5.9.3.1

5.9.3.2

5.9.3.3

5.10 Damp heat, cyclic (operational)

5.10.1 Object of test

5.10.2 Test procedure

5.10.2.1 Reference

5.10.2.2 State of the specimen during conditioning

5.10.2.3 Conditioning

5.10.2.4 Measurements during conditioning

5.10.2.5 Final measurements

5.10.2.5.1

5.10.2.5.2

5.10.3 Requirements

5.10.3.1

5.10.3.2

5.11 Damp heat, cyclic (endurance)

5.11.1 Object of test

5.11.2 Test procedure

5.11.2.1 Reference

5.11.2.2 State of the specimen during conditioning

5.11.2.3 Conditioning

5.11.2.4 Final measurements

5.11.3 Requirements

5.11.3.1

5.11.3.2

5.12 Damp heat, steady state (endurance)

5.12.1 Object of test

5.12.2 Test procedure

5.12.2.1 Reference

5.12.2.2 State of the specimen during conditioning

5.12.2.3 Conditioning

5.12.2.4 Final measurements

5.12.3 Requirements

5.12.3.1

5.12.3.2

5.13 SO2 corrosion (endurance)

5.13.1 Object of test

5.13.2 Test procedure

5.13.2.1 Reference

5.13.2.2 State of the specimen during conditioning

5.13.2.3 Conditioning

5.13.2.4 Final measurements

5.13.2.4.1

5.13.2.4.2

5.13.3 Requirements

5.13.3.1

5.13.3.2

5.14 Shock (operational)

5.14.1 Object of test

5.14.2 Test procedure

5.14.2.1 Reference

5.14.2.2 State of the specimen during conditioning

5.14.2.3 Conditioning

5.14.2.4 Measurements during conditioning

5.14.2.5 Final measurements

5.14.3 Requirements

5.14.3.1

5.14.3.2

5.15 Impact (operational)

5.15.1 Object of test

5.15.2 Test procedure

5.15.2.1 Apparatus

5.15.2.1.1

5.15.2.1.2

5.15.2.2 State of the specimen during conditioning

5.15.2.2.1

5.15.2.2.2

5.15.2.2.3

5.15.2.2.4

5.15.2.3 Conditioning

5.15.2.4 Measurements during conditioning

5.15.2.5 Final measurements

5.15.3 Requirements

5.15.3.1

5.15.3.2

5.16 Vibration, sinusoidal (operational)

5.16.1 Object of test

5.16.2 Test procedure

5.16.2.1 Reference

5.16.2.2 State of the specimen during conditioning

5.16.2.2.1

5.16.2.2.2

5.16.2.3 Conditioning

5.16.2.4 Measurements during conditioning

5.16.2.5 Final measurements

5.16.2.5.1

5.16.2.5.2

5.16.3 Requirements

5.16.3.1

5.16.3.2

5.17 Vibration, sinusoidal (endurance)

5.17.1 Object of test

5.17.2 Test procedure

5.17.2.1 Reference

5.17.2.2 State of the specimen during conditioning

5.17.2.3 Conditioning

5.17.2.4 Final measurements

5.17.3 Requirements

5.17.3.1

5.17.3.2

5.18 Electromagnetic compatibility (EMC) (operational)

5.18.1 Object of test

5.18.2 Test procedure

5.18.2.1 Reference

5.18.2.2 State of the specimen during conditioning

5.18.2.3 Conditioning

5.18.2.4 Measurement during conditioning

5.18.2.5 Final measurements

5.18.3 Requirements

5.18.3.1

5.18.3.2

5.18.3.3

5.19 Enclosure protection

5.19.1 Object of test

5.19.2 Test procedure

5.19.2.1 Reference

5.19.2.2 State of the specimen during conditioning

5.19.2.3 Conditioning

5.19.2.4 Measurement during conditioning

5.19.2.5 Final measurements

5.19.3 Requirements

5.19.3.1

5.19.3.2

5.20 Exposure to simulated solar radiation (endurance)

5.20.1 Object of test

5.20.2 Test procedure

5.20.2.1 Reference

5.20.2.2 State of the specimen during conditioning

5.20.2.3 Conditioning

5.20.2.4 Final measurements

5.20.3 Requirements

5.20.3.1

5.20.3.2

5.20.3.3

6 Test report

Annex A

A.1

A.2

A.3

Annex B

Annex C

C.1

C.2

C.3

C.4

C.5

C.6

C.7

Bibliography

Cited references in this standard

Content history

AS 1603.5-1996

[Superseded]

ISO 7240-11:2011

[Current]

AS 7240.11-2008

[Superseded]

AS 1603.5-1996 AMDT 1

[Superseded]

AS 1603.5-1996 Rec:2016

One-time Purchase

Access via web browser on any device

One-time purchase

Single publication

Offline access via PDF^

$169.15 AUD

Inclusive of GST

Format *

Web Reader

Licenses *

1 user

Total$169.15 AUD

Add to Cart

IMPORTANT