Standard
Track updates
AS ISO 7240.10:2018
[Current]Fire detection and alarm systems, Part 10: Point-type flame detectors
The objective of this Standard is to specify the requirements, test methods and performance criteria for manual call points in fire detection and alarm systems in and around buildings (refer to AS ISO 7240‑1).
Published: 20/12/2018
Pages: 37
Table of contents
Cited references
Content history
Table of contents
Header
About this publication
Preface
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Abbreviated terms
5 General requirements
5.1 Compliance
5.2 Classification
5.3 Individual alarm indication
5.3.1
5.3.2
5.4 Connection of ancillary devices
5.5 Monitoring of detachable detectors
5.6 Manufacturer adjustments
5.7 On-site sensitivity adjustment
5.8 Ingress protection (IP) — Optional function
5.9 Marking
5.9.1
5.9.2
5.9.3
5.9.4
5.9.5
5.10 Data
5.10.1
5.10.2
5.10.3
5.11 Requirements for software-controlled detectors
5.11.1 General
5.11.2 Software documentation
5.11.2.1
5.11.2.2
5.11.3 Software design
5.11.4 Storage of programs and data
5.11.4.1
5.11.4.2
6 Tests
6.1 General
6.1.1 Atmospheric conditions for tests
6.1.1.1
6.1.1.2
6.1.2 Operating conditions for tests
6.1.2.1
6.1.2.2
6.1.2.3
6.1.3 Mounting arrangements
6.1.4 Tolerances
6.1.4.1
6.1.4.2
6.1.5 Determination of response point
6.1.5.1 Principle
6.1.5.2 Test apparatus
6.1.5.2.1
6.1.5.2.2
6.1.5.3 Initial determination
6.1.5.4 Source stability
6.1.6 Test procedure
6.1.6.1
6.1.6.2
6.1.6.3
6.1.6.4
6.1.7 Reduced functional tests
6.1.8 Provision for tests
6.1.8.1
6.1.8.2
6.1.9 Test schedule
6.1.10 Test report
6.2 Reproducibility
6.2.1 Object of test
6.2.2 Test procedure
6.2.2.1
6.2.2.2
6.2.2.3
6.2.3 Requirements
6.3 Repeatability
6.3.1 Object of test
6.3.2 Test procedure
6.3.2.1
6.3.2.2
6.3.3 Requirements
6.4 Directional dependence
6.4.1 Object of test
6.4.2 Test procedure
6.4.2.1
6.4.2.2
6.4.2.3
6.4.3 Requirements
6.5 Fire sensitivity
6.5.1 Object of test
6.5.2 Test procedure
6.5.2.1 Principle of test
6.5.2.2 Mounting of specimens
6.5.2.2.1
6.5.2.2.2
6.5.2.2.3
6.5.2.3 Test fires
6.5.2.3.1
6.5.2.3.2
6.5.2.3.3
6.5.2.3.4
6.5.2.3.5
6.5.2.3.6
6.5.2.3.7
6.5.2.3.8
6.5.2.3.9
6.5.2.3.10
6.5.2.3.11
6.5.2.3.12
6.5.3 Classification
6.5.4 Requirements
6.5.4.1
6.5.4.2
6.6 Dazzling (operational)
6.6.1 Object of test
6.6.2 Test procedure and apparatus
6.6.2.1 Reference
6.6.2.2 State of the specimen during conditioning
6.6.2.3 Conditioning
6.6.2.4 Measurements during conditioning
6.6.2.5 Final measurement (light source on)
6.6.2.5.1
6.6.2.5.2
6.6.2.6 Final measurement (light source off)
6.6.2.6.1
6.6.2.6.2
6.6.3 Requirements
6.6.3.1
6.6.3.2
6.6.3.3
6.7 Dry heat (operational)
6.7.1 Object of test
6.7.2 Test procedure and apparatus
6.7.2.1 General
6.7.2.2 State of the specimen during conditioning
6.7.2.3 Conditioning
6.7.2.4 Measurements during conditioning
6.7.2.5 Final measurements
6.7.2.5.1
6.7.2.5.2
6.7.3 Requirements
6.7.3.1
6.7.3.2
6.7.3.3
6.8 Cold (operational)
6.8.1 Object of test
6.8.2 Test procedure
6.8.2.1 Reference
6.8.2.2 State of the specimen during conditioning
6.8.2.3 Conditioning
6.8.2.4 Measurements during conditioning
6.8.2.5 Final measurements
6.8.2.5.1
6.8.2.5.2
6.8.3 Requirements
6.8.3.1
6.8.3.2
6.8.3.3
6.9 Damp heat, cyclic (operational)
6.9.1 Object of test
6.9.2 Test procedure
6.9.2.1 Reference
6.9.2.2 State of the specimen during conditioning
6.9.2.3 Conditioning
6.9.2.4 Measurements during conditioning
6.9.2.4.1
6.9.2.4.2
6.9.2.5 Final measurements
6.9.2.5.1
6.9.2.5.2
6.9.3 Requirements
6.9.3.1
6.9.3.2
6.9.3.3
6.10 Damp heat, steady state (endurance)
6.10.1 Object of test
6.10.2 Test procedure
6.10.2.1 Reference
6.10.2.2 State of the specimen during conditioning
6.10.2.3 Conditioning
6.10.2.4 Final measurements
6.10.2.4.1
6.10.2.4.2
6.10.3 Requirements
6.10.3.1
6.10.3.2
6.11 Sulfur dioxide (SO2) corrosion (endurance)
6.11.1 Object of test
6.11.2 Test procedure
6.11.2.1 Reference
6.11.2.2 State of the specimen during conditioning
6.11.2.3 Conditioning
6.11.2.4 Final measurements
6.11.2.4.1
6.11.2.4.2
6.11.3 Requirements
6.11.3.1
6.11.3.2
6.12 Shock (operational)
6.12.1 Object of test
6.12.2 Test procedure and apparatus
6.12.2.1 General
6.12.2.2 State of the specimen during conditioning
6.12.2.3 Conditioning
6.12.2.3.1
6.12.2.3.2
6.12.2.4 Measurements during conditioning
6.12.2.5 Final measurements
6.12.2.5.1
6.12.2.5.2
6.12.3 Requirements
6.12.3.1
6.12.3.2
6.13 Impact (operational)
6.13.1 Object of test
6.13.2 Test procedure
6.13.2.1 Apparatus
6.13.2.2 State of the specimen during conditioning
6.13.2.3 Conditioning
6.13.2.4 Measurements during conditioning
6.13.2.5 Final measurements
6.13.2.3.1
6.13.2.3.2
6.13.3 Requirements
6.13.3.1
6.13.3.2
6.13.3.3
6.14 Vibration, sinusoidal (operational)
6.14.1 Object of test
6.14.2 Test procedure
6.14.2.1 Reference
6.14.2.2 State of the specimen during conditioning
6.14.2.3 Conditioning
6.14.2.3.1
6.14.2.3.2
6.14.2.4 Measurements during conditioning
6.14.2.5 Final measurements
6.14.2.5.1
6.14.2.5.2
6.14.3 Requirements
6.14.3.1
6.14.3.2
6.15 Vibration, sinusoidal (endurance)
6.15.1 Object of test
6.15.2 Test procedure
6.15.2.1 Reference
6.15.2.2 State of the specimen during conditioning
6.15.2.3 Conditioning
6.15.2.4 Final measurements
6.15.2.4.1
6.15.2.4.2
6.15.3 Requirements
6.16 Variation of supply parameters (operational)
6.16.1 Object of test
6.16.2 Test procedure
6.16.2.1
6.16.2.2
6.16.3 Requirements
6.17 EMC immunity tests (operational)
6.17.1
6.17.2
6.18 IP — Optional function
6.18.1 Object of test
6.18.2 Enclosure of the flame detector
6.18.3 Test procedure
6.18.3.1 Reference
6.18.3.2 State of the specimen during conditioning
6.18.3.2.1
6.18.3.2.2
6.18.3.2.3
6.18.3.3 Conditioning
6.18.3.4 Measurement during conditioning
6.18.3.5 Final measurements
6.18.3.5.1
6.18.3.5.2
6.18.4 Requirements
6.18.4.1
6.18.4.2
7 Test report
Annex A
A.1 Optical bench
A.1.1
A.1.2
A.1.3
A.1.4
A.2 Radiation source
A.2.1
A.2.2
A.2.3
A.3 Shutter
A.4 Modulator
A.5 Radiometer
A.5.1
A.5.2
Annex B
B.1 Fuel
B.2 Arrangement
B.2.1
B.2.2
B.3 Ignition
B.4 End-of-test condition
Annex C
C.1 Fuel
C.2 Arrangement
C.3 Volume
C.4 Ignition
C.5 End-of-test condition
Annex D
D.1
D.2
D.3
D.4
Annex E
E.1
E.2
E.3
E.4
E.5
E.6
E.7
Annex F
Cited references in this standard
$161.10
AUD
Inclusive of GST
Available formats
Web Reader
Licence:
1 user
Total
$161.10
