Standard
Track updates
AS ISO 6993.3-2007
[Current]Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels, Part 3: Fittings and saddles for a maximum operating pressure of 1 bar (100 kPa)
Adopts ISO 6993-3:2006, which specifies the requirements for full-end load-bearing fittings made of high-impact poly(vinyl chloride) (PVC-HI) intended to be used for the supply of gaseous fuels through buried pipelines having an operating temperature range of 0 degrees Celsius up to and including +30 degrees Celsius and a maximum operating pressure of 1 mbar (100 kPa).
Published: 12/07/2007
Pages: 25
Table of contents
Cited references
Content history
Table of contents
Header
About this publication
Preface
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviated terms
3.1 Terms and definitions
3.2 Symbols
4 Material
4.1 Material for fittings/saddles
4.1.1 Composition
4.1.2 Long-term strength
4.1.3 Vicat softening temperature
4.1.4 K-value
4.2 Material for elastomeric sealing elements
5 General characteristics of fittings/saddles
5.1 Contaminants
5.2 Appearance and finish
6 Geometrical characteristics
6.1 Measurements
6.2 Fittings
6.2.1 Spigot ends on moulded fittings
6.2.2 Sockets on moulded fittings
6.3 Saddles
6.3.1 General
6.3.2 Wall thickness and cross-section area
7 Physical characteristics
8 Mechanical characteristics
8.1 Fittings
8.2 Saddles
9 Saddle design and construction
10 Performance requirements
10.1 Fittings — Tensile test for in-line fitting assemblies
10.2 Saddles
10.2.1 Tightness of joint between pipe and saddle, with and without mechanical loading
10.2.2 Tightness of joint between pipe and saddle under negative pressure and mechanical loading
10.2.3 Tightness of lateral connection under constant load/tensile testing at constant speed
11 Test methods
11.1 General
11.2 Determination of particle size of contaminants
11.3 Determination of influence of heat for injection moulded fittings
12 Marking
Annex A
A.1 Principle
A.2 Test and conditioning
A.3 Additional test requirements
A.4 Interpretation of results
Annex B
B.1 Principle
B.2 Apparatus
B.2.1
B.2.2
B.2.3
B.3 Test pieces
B.4 Test temperature and conditioning
B.5 Failure criteria
B.6 Test procedure
Annex C
C.1 Principle
C.2 Apparatus
C.3 Test pieces
C.4 Test temperature and conditioning
C.5 Test procedure
Annex D
D.1 Principle
D.2 Apparatus
D.2.1
D.2.2
D.2.3
D.3 Test piece
D.4 Test temperature and conditioning
D.5 Test procedure
Annex E
E.1 Principle
E.2 Apparatus
E.2.1
E.2.2
E.2.3
E.2.4
E.3 Test piece
E.4 Test temperature and conditioning
E.5 Test procedure
Annex F
F.1 Principle
F.2 Apparatus
F.2.1
F.2.2
F.2.3
F.3 Test pieces
F.4 Test temperature and conditioning
F.5 Test procedure
Bibliography
Cited references in this standard
Content history
[Current]
[Superseded]
[Superseded]
[Superseded]
[Superseded]
$135.16
AUD
Inclusive of GST
Available formats
Web Reader
Licence:
1 user
Total
$135.16
