Standard
UPDATE AVAILABLE
AS 7240.13-2006
[Superseded]Fire detection and alarm systems, Part 13: Compatibility assessment of system components
Specifies requirements for compatibility and connectability assessment of system components that either comply with the requirements of ISO 7240 series of Standards or with a manufacturer’‘s specification where there is no ISO or AS 7240 Standards. Includes system requirements when these are necessary for compatibility assessment. Identical with and reproduced from ISO 7240-13:2005.
Published: 09/03/2006
Pages: 18
Table of contents
Cited references
Content history
Table of contents
Header
About this publication
Preface
Introduction
1 Scope
2 Normative references
3 Terms, abbreviated terms and definitions
3.1 Definitions
3.2 Abbreviation terms
4 Requirements
4.1 Compliance
4.2 General system requirements
4.2.1
4.2.2
4.2.3
4.3 Networked systems
4.3.1 General
4.3.1.1
4.3.1.2
4.3.1.3
4.3.2 Hierarchical systems
4.3.3 Software
4.4 Components
4.4.1 Classification
4.4.1.1
4.4.1.2
4.4.2 Requirements
4.4.2.1
4.4.2.2
4.4.2.3
4.4.2.4
4.5 Transmission path(s)
4.5.1
4.5.2
4.5.3
4.5.4
4.6 Input and output devices linked to a fire protection system
4.6.1 General requirements
4.6.2 Input device transferring signals from a fire protection system
4.7 Documentation
4.7.1 General
4.7.2 Documentation for compatibility
4.7.3 Documentation for connectability
4.7.4 Software documentation
4.7.4.1
4.7.4.2
5 Assessment methods
5.1
5.2
5.3
5.4
6 Tests
6.1 General
6.1.1 Atmospheric conditions for tests
6.1.2 Mounting and electrical connection
6.1.2.1
6.1.2.2
6.1.2.3
6.2 Compatibility
6.2.1 Objective of test
6.2.2 Test schedule
6.2.2.1
6.2.2.2
6.2.2.3
6.2.2.4
6.2.3 Fire alarm condition
6.2.3.1 Procedure
6.2.3.2 Requirements
6.2.4 Fault warning condition
6.2.4.1 Procedure for open circuit on a transmission path — Optional assessment
6.2.4.1.1 General
6.2.4.1.2 Requirements
6.2.4.2 Procedure for short circuit on a transmission path – Optional assessment
6.2.4.2.1 General
6.2.4.2.2 Requirements
6.2.4.3 Procedure for interruption of mains power supply
6.2.4.3.1 General
6.2.4.3.2 Requirements
6.2.5 Disablement condition
6.2.5.1 Procedure
6.2.5.2 Requirements
6.2.6 Test condition (if provided)
6.2.6.1 Procedure
6.2.6.2 Requirements
6.3 Connectability
6.3.1 Objective of test
6.3.2 Test schedule
6.3.2.1
6.3.2.2
6.3.3 Procedure
6.3.4 Requirements
6.4 Electromagnetic compatibility tests
6.4.1 Objective of test
6.4.2 Test schedule
6.4.3 Requirements
7 Test report
Annex A
Annex B
B.1 Introduction
B.2 Method of test
B.2.1 General
B.2.2 List of characteristics
B.2.2.1 Mechanical connections
B.2.2.2 Power supply and distribution analysis
B.2.2.2.1 Voltage range
B.2.2.2.2 Current
B.2.2.2.3 Supply characteristics
B.2.2.2.4 Tolerances
B.2.2.2.5 Fault performance
B.2.2.3 Data exchange analysis
B.2.2.3.1 General
B.2.2.3.2 Transmission characteristics
B.2.2.3.2.1 General
B.2.2.3.2.2 Voltage range
B.2.2.3.2.3 Current
B.2.2.3.2.4 Timing
B.2.2.3.2.5 Distortion/phase angles
B.2.2.3.2.6 Tolerances
B.2.2.3.2.7 Fault performance
B.2.2.3.3 Transmission protocol(s)
B.2.2.4 Functionality
B.2.2.4.1 General
B.2.2.4.2 Received data
B.2.2.4.3 Transmitted data
Annex C
C.1 Objective
C.2 Fire detection function
C.3 Fire alarm function
C.3.1 Alarm to occupants in the premises
C.3.2 Alarm to summon external assistance (usually the fire brigade)
C.4 Activation of fire protection function
C.4.1 Equipment directly triggered by the f.d.a.s.
C.4.2 System driven by the information coming from the f.d.a.s.
C.5 External indication 1 (remote panels, fire brigade panels, etc.)
C.6 External indication 2 (printers, building management systems, etc.)
C.7 Input function
C.8 Output function
C.9 Connection devices between transmission paths (gateway, etc.)
Annex ZA
Amendment control sheet
AS 7240.13—2006
Amendment No. 1 (2006)
Correction
Cited references in this standard
Content history
[Current]
[Superseded]
[Superseded]
DR 04386
AS 7240.13-2006 Rec:2016
One-time Purchase
Access via web browser on any device
One-time purchase
Single publication
Offline access via PDF^
$90.82 AUD
Inclusive of GSTFormat *
Web Reader
Licenses *
1 user
Total$90.82 AUD
IMPORTANT