Standard
UPDATE AVAILABLE
AS 5062:2016
[Superseded]Fire protection for mobile and transportable equipment
Specifies fire risk management procedures and the minimum requirements for fire protection system design, installation, commissioning, and maintenance for use on mobile and transportable equipment. The requirements for listing of fire protection systems and the testing requirements for pre-engineered foam-water spray systems are also specified.
Published: 11/07/2016
Pages: 87
Table of contents
Cited references
Content history
Table of contents
Header
About this publication
Preface
1 Scope and general
1.1 Scope
1.2 Limitations
1.3 Referenced documents
1.4 Definitions
1.5 Interpretation of specified limiting values
2 Fire risk management
2.1 General
2.1.1 Fire risk management process
2.1.2 Risk assessment
2.1.2.1 General
2.1.2.2 Process
2.1.2.3 Methods
2.1.3 Fire incidents
2.2 Consultation
2.3 Records
2.4 Fire hazard identification
2.4.1 General
2.4.2 Fuels
2.4.2.1 General
2.4.2.2 Types
2.4.2.3 Properties
2.4.3 Oxidizers
2.4.4 Ignition sources
2.4.5 Potential fire hazard locations
2.4.6 Operating environments
2.5 Fire risk analysis
2.5.1 General
2.5.2 Fire risk determination
2.5.2.1 General
2.5.2.2 Fire effects
2.5.3 Operational conditions
2.5.4 Existing risk controls
2.6 Fire risk evaluation
2.7 Monitoring and review
3 Fire risk reduction
3.1 General
3.1.1 Risk reduction hierarchy
3.1.2 Introduction of further risk
3.2 Design measures and safeguards
3.2.1 General
3.2.2 Fuel sources
3.2.3 Ignition sources
3.2.4 Overheating
3.2.5 Segregation
3.2.6 Accumulation of combustible or flammable materials
3.2.7 Reduction of fire effects
3.2.8 Miscellaneous
3.3 Administrative controls
3.3.1 Maintenance and housekeeping
3.3.1.1 Maintenance
3.3.1.2 Hot work
3.3.1.3 Combustible materials
3.3.1.4 Inspection and cleaning
3.3.1.5 Replacement parts
3.3.2 Training
3.4 Documentation
3.5 Fire protection systems
3.5.1 General
3.5.2 Automatically operated fire suppression system
3.5.3 Manually operated fire suppression system
3.5.4 Fire detection and alarm system
4 Safety requirements
4.1 Emergency procedures
4.2 Emergency stop device
4.3 Signs and warning notices
4.3.1 General
4.3.2 Action in the event of fire
4.3.3 Fire protection system warning notices
4.3.4 Manual actuation instruction notice
4.4 Fire extinguishers
4.4.1 General
4.4.2 Selection
4.4.3 Operator training
4.4.4 Location
4.4.5 Maintenance
5 Fire protection systems
5.1 General
5.2 Fire protection system functions
5.2.1 General
5.2.2 Fire detection and alarm system with automatically operated suppression system
5.2.3 Fire detection and alarm system with manually operated fire suppression system
5.2.4 Manually operated fire suppression system
5.2.5 Fire detection and alarm system only
5.3 Extinguishing agent
5.3.1 General
5.3.2 Selection
5.4 Operating conditions
5.5 Fire system specification
5.6 Listing of fire protection systems
5.7 Fire testing requirements for foam water spray fire suppression systems
5.7.1 General
5.7.2 Test 1 acceptance criteria
5.7.3 Test 2 acceptance criteria
5.8 Design and installation
5.9 Equipment modifications
5.10 Documentation
5.11 Fire protection systems
5.11.1 General
5.11.2 Isolation of fire suppression systems
5.12 System safety requirements
5.12.1 Electrical clearances
5.12.2 Safety clearances
6 Fire protection system design
6.1 General
6.1.1 Design
6.1.2 Fire system specification
6.2 Design documentation
6.2.1 General
6.2.2 Specific design detail
6.2.3 Provision of design documentation
6.3 System design procedures
6.3.1 General
6.3.2 Engineered systems
6.3.2.1 General
6.3.2.2 Foam fire suppression systems
6.3.2.3 Water mist
6.3.2.4 Gaseous agent
6.3.3 Pre-engineered systems
6.3.3.1 General
6.3.3.2 Foam water spray
6.3.3.3 Powder
6.3.3.4 Wet chemical
6.3.3.5 Condensed aerosol
6.3.3.6 Dual agent
6.4 Quantity of agent
6.4.1 General
6.4.2 Special conditions
6.5 Equipment shutdown
6.6 Air handling
6.7 Discharge time
6.8 System flow calculations
6.9 Containment of extinguishing agent
6.10 Identification of discharge nozzles
7 Supply
7.1 Storage containers
7.1.1 General
7.1.2 Pressurized containers
7.1.3 Pressure indication
7.1.4 Pressurized container transport and storage
7.2 Storage container arrangement
7.2.1 General
7.2.2 Location and mounting
7.2.3 Agent storage container orientation
7.3 Identification, marking and labelling of containers
7.3.1 Colour identification
7.3.2 Permanent markings
7.3.3 Labelling
7.4 Fire protection system control valves
7.4.1 General
7.4.2 Isolating valves
8 Distribution system
8.1 General
8.2 Distribution system supports
8.3 Compatibility
8.4 Installation of distribution system
8.4.1 General
8.4.2 Flow restrictions
8.5 Nozzles
8.5.1 General
8.5.2 Nozzle choice and location
9 Fire detection, actuation and control systems
9.1 General
9.2 Manual actuation
9.3 Electrical systems
9.4 Pneumatic systems
9.5 Mechanical systems
9.6 Control and indicating equipment
9.6.1 General
9.6.2 System status indication panel
9.6.3 System control and indicator panel
9.6.3.1 General
9.6.3.2 Power supply
9.6.4 Marking
9.6.5 Engine shutdown
9.6.6 Engine shutdown time delay—Optional function
9.6.7 Engine shutdown override—Optional function
9.6.8 Audible indication
9.6.9 Visual indication
9.6.10 Container pressure switch input
10 Commissioning and acceptance of fire protection system
10.1 General
10.2 Discharge test
10.2.1 General
10.2.2 Reporting
10.3 System function and operation test
10.4 Completion report and documentation
10.5 Operation and maintenance manuals
10.6 Training
11 Service of fire protection systems
11.1 General
11.2 Service personnel
11.3 Records
11.3.1 General
11.3.2 Service tag or label
11.4 Precautions
11.5 Recharge of extinguishing agent
11.6 Service requirements
11.6.1 General
11.6.2 Defects
11.6.3 Design survey
11.6.4 Condition report
11.7 Routine service schedules for pre-engineered systems
Appendix A
Appendix B
B1 General
B2 Qualitative analysis
B3 Semi-quantitative analysis
B4 Quantitative analysis
B5 Sensitivity analysis
Appendix C
Appendix D
Appendix E
E1 Scope
E2 General requirements
E3 Test 1—Fuel spill extinguishment and reignition test—Direct application
E3.1 General
E3.2 Principle
E3.3 Apparatus
E3.4 Apparatus arrangement
E3.5 Procedure
E3.6 Records
E4 Test 2—Fuel spill extinguishment and fuel spray reignition test—Indirect application
E4.1 General
E4.2 Principle
E4.3 Apparatus
E4.4 Apparatus arrangement
E4.5 Procedure
E4.6 Records
E5 Reporting
Appendix F
Appendix G
Appendix H
Amendment control sheet
AS 5062:2016
Amendment no. 1 (2017)
Correction
Cited references in this standard
Content history
[Current]
[Superseded]
[Superseded]
DR AS 5062:2015
One-time Purchase
Access via web browser on any device
One-time purchase
Single publication
Offline access via PDF^
$184.53 AUD
Inclusive of GSTFormat *
Web Reader
Licenses *
1 user
Total$184.53 AUD
IMPORTANT