Standard
UPDATE AVAILABLE
AS 5039-2008
[Superseded]Security screen doors and security window grilles
Sets out the requirements for the performance of hinged and sliding security screen doors and security window grilles used primarily in residential situations.
Published: 19/05/2008
Pages: 50
Table of contents
Cited references
Content history
Table of contents
Header
About this publication
Preface
Foreword
1 Scope
2 Application
3 Referenced documents
4 Definitions
5 Classification of security screen doors and window grilles
5.1 General
5.2 Types (applicable to security screen doors and window grilles)
5.3 Classes (applicable only to window grilles)
6 General requirements
6.1 Galvanic compatibility
6.2 Corrosion protection
6.2.1 General
6.2.2 Testing requirements
6.2.3 Deemed-to-satisfy provisions
6.3 Infill material
6.3.1 General
6.3.2 Type I infill material
6.4 Hinges
6.5 Locks
6.5.1 General
6.5.2 Not accessible from outside
6.5.3 Accessible from outside
6.6 Lock fitting
6.7 Rivets
6.8 Accessible fastening devices
6.9 Dimensions of door leafs
7 Performance
7.1 General
7.2 Dynamic impact test
7.3 Jemmy test
7.4 Pull test
7.5 Probe test
7.6 Shear test
7.7 Knife shear test
8 Marking
9 Installation instructions
Appendix A
A1 Scope
A2 Statistical sampling
A3 Product certification
A4 Supplier’s quality management system
A5 Other means of assessment
Appendix B
Appendix C
C1 Hinged security screen door identification details
C1.1 General description
C1.2 Door framing
C1.3 Midrail (if used)
C1.3.1 General
C1.3.2 Weld details (if midrail is welded to doorframe)
C1.3.3 Fastener details (if midrail is not welded to doorframe)
C1.4 Corner stake
C1.4.1 General
C1.4.2 Fastener details for corner stake
C1.5 Infill
C1.5.1 General
C1.5.2 Weld details (if infill is welded to doorframe)
C1.5.3 Fastener details (if infill is not welded to doorframe)
C1.6 Hinges
C1.6.1 General
C1.6.2 Weld details (if hinges are welded to doorframe)
C1.6.3 Fastener details (if hinges are not welded to doorframe)
C1.7 Lock
C1.7.1 General
C1.7.2 Means of mounting lock to doorframe
C1.8 Mounting frame
C1.9 Internal stiffening members
C2 Hinged security door test report
C3 Sliding security screen door identification details
C3.1 General description
C3.2 Door framing
C3.3 Midrail
C3.3.1 General
C3.3.2 Weld details (if midrail is welded to doorframe)
C3.3.3 Fastener details (if midrail is not welded to doorframe)
C3.4 Corner stake
C3.4.1 General
C3.4.2 Fastener details
C3.5 Infill
C3.5.1 General
C3.5.2 Weld details
C3.5.3 Fastener details (if infill is not welded to doorframe)
C3.6 Tracks
C3.6.1 General
C3.6.2 Fastener detail for tracks
C3.7 Lock stile receiver channel
C3.8 Lock
C3.8.1 General
C3.8.2 Means of mounting
C3.9 Interlock
C3.9.1 General
C3.9.2 Fastener detail for interlock
C3.10 Rollers
C3.11 Mounting frame
C3.12 Internal stiffening members
C4 Test report for sliding security screen doors
C4.1 Details of test door
C4.2 Details of door infill
C5 For security window grille indentification details
C5.1 Description general
C5.2 Window frame
C5.3 Midrail (if used)
C5.3.1 General
C5.3.2 Weld details (if midrail is welded to window frame)
C5.3.3 Fastener details (if midrail is not welded to window frame)
C5.4 Corner stake
C5.4.1 General
C5.4.2 Fastener details for corner stake
C5.5 Infill material
C5.5.1 General
C5.5.2 Weld details (if infill is welded to window frame)
C5.5.3 Fastener details (if infill is not welded to doorframe)
C5.6 Internal stiffening members
C5.7 Lock
C5.7.1 General
C5.7.2 Means of mounting lock to window frame
C5.8 Interlock
C5.8.1 General
C5.8.2 Fastener details
C5.9 Tracks or build-outs
C5.9.1 General
C5.9.2 Fastener details
C5.10 Mounting frame
C6 Test reports for window grille test report
C6.1 Details of test window grille
C6.2 Details of test window infill
C7 Identification details for Type III infill panels
C7.1 General description
C7.2 Framing
C7.3 Material
C7.4 Infill Type III
C7.5 Fastener details
C8 Report for knife shear test
C8.1 Knife shear test/report
C8.2 Results
C8.3 Results
Appendix D
Cited references in this standard
[Current]
Locksets and hardware for doors and windows, Part 2: Mechanical locksets for doors and windows in buildings
[Current]
Sampling procedures for inspection by attributes, Part 0: Introduction to the ISO 2859 attribute sampling system
[Current]
Sampling procedures for inspection by attributes, Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
One-time Purchase
Access via web browser on any device
One-time purchase
Single publication
Offline access via PDF^
$203.34 AUD
Inclusive of GSTFormat *
Web Reader
Licenses *
1 user
Total$203.34 AUD
IMPORTANT