Standard
Track updates
iconCreated with Sketch.

AS 5007-2007

[Current]

Powered doors for pedestrian access and egress

Proposes requirements for the design, and test methods for, drive units, leaves and components of powered pedestrian doors, including constructions that are operated electro-mechanically, electro-hydraulically or pneumatically.
Published: 12/09/2007
Pages: 68
Table of contents
Cited references
Content history
Table of contents
Header
About this publication
Preface
1 Scope and general
1.1 Scope
1.2 Application
1.3 Referenced documents
1.4 Definitions
2 Product design requirements
2.1 General
2.2 Drive
2.2.1 General
2.2.2 Devices for stopping the leaf movement
2.2.3 Activation of the drive
2.2.4 Electrical equipment
2.2.5 Hydraulic or pneumatic equipment (if fitted)
2.2.6 Locking devices
2.3 Powered operation
2.3.1 General
2.3.2 Limitation of leaf forces
2.3.2.1 General
2.3.3 Kinetic energy limitations
2.3.3.1 Sliding door
2.3.3.2 Swing door
2.3.3.3 Low energy powered swing door
2.3.4 Protective devices
2.3.4.1 General
2.3.4.2 Types of protective devices
2.3.4.3 Design of protective devices
2.3.5 Guards/barriers
2.3.5.1 Guards
2.3.5.2 Barriers
2.4 Manual operation
2.5 Door leaf
2.5.1 Materials
2.5.1.1 General
2.5.1.2 Aluminium
2.5.1.3 Glass
2.5.1.4 Steel
2.5.1.5 Timber
2.5.2 Shaping of leaf surfaces
2.5.3 Leaf travel limiting device
2.5.4 Loads
2.5.4.1 General
2.5.4.2 Vertical loads
2.5.4.3 Lateral loads
2.5.4.4 Racking loads
2.5.5 Door leaf frames
2.6 Tracks
2.7 Hangers
2.8 Bottom guides
2.9 Additional requirements
2.9.1 Additional requirements for revolving doors
2.9.1.1 Peripheral speed
2.9.1.2 Door clearance
2.9.1.3 Door break out safety
2.9.1.4 Static entrapment force
2.9.1.5 Emergency stop
2.9.1.6 Lighting
2.9.1.7 Slow speed
2.9.1.8 Unattended door parking and locking
2.9.2 Additional requirements for low energy powered swing doors
2.9.2.1 General
2.9.2.2 Opening and closing time
2.9.2.3 Door open dwell time
2.9.3 Additional requirements for doors in escape routes and emergency exits
2.9.3.1 General
2.9.3.2 Powered sliding doors with break-out
2.9.3.2.1 Floor guide
2.9.3.2.2 Threshold
2.9.3.2.3 Operating mode selector
2.9.3.2.4 Break out function lock
2.9.3.2.5 Break out function
2.9.3.2.6 Break out signage
2.9.3.3 Powered sliding doors without break-out
2.9.3.3.1 Opening time
2.9.3.3.2 Control system function
2.9.3.3.3 Mains power failure (failsafe)
2.9.3.4 Powered swing doors
2.10 Additional requirements for powered pedestrian doors
2.10.1 Fire resistant door
2.10.2 Dual function unhindered access/egress door with selectable security override
2.10.3 Dedicated security door
3 Installation design requirements
3.1 General (environmental and management)
3.1.1 General
3.1.2 Design, application, and installation requirements
3.2 Materials
3.3 Activation
3.3.1 Automatic activators
3.3.1.1 General
3.3.1.2 Mat activators
3.3.1.3 Sensor activation
3.3.1.4 Photoelectric activation
3.3.2 Manual activation
3.3.3 Remote activation
3.3.4 Special activation requirements
3.4 Safeguarding against danger points
3.4.1 General
3.4.2 Safety clearances for powered sliding doors
3.4.3 Powered sliding doors
3.4.3.1 General
3.4.3.2 Danger points during the opening cycle
3.4.3.3 Danger points during the closing cycle
3.4.4 Attachments
3.4.5 Powered swing doors
3.4.5.1 General
3.4.5.2 Danger at primary leading edges
3.4.5.2.1 During opening
3.4.5.2.2 During closing
3.4.5.3 Danger points at secondary closing edges between leaf and frame
3.4.6 Low energy powered swing doors
3.4.7 Powered revolving doors
3.4.7.1 General
3.4.7.2 Door leaf safety device
3.4.7.3 Leading mullion safety devices
3.4.7.4 Special requirements for revolving doors used in access control/security
3.4.7.5 Holding force
3.4.7.6 Peak stopping force
3.4.7.7 Maximum freewheel force
3.4.7.8 Maximum break-out force
3.4.8 Other types of powered doors
3.4.8.1 Powered balanced doors
3.4.8.2 Power folding doors
3.5 Door signage
3.5.1 General
3.5.2 Type 1
3.5.3 Type 2
3.5.4 Type 3
3.5.5 Type 4
4 Testing criteria
4.1 General
4.2 Test conditions
4.2.1 General
4.2.2 Measuring equipment
4.3 Documentation for test
4.3.1 General
4.3.2 Documentation for mechanical construction
4.3.3 Documentation of electrical components
4.4 Testing
4.4.1 Endurance tests
4.4.1.1 Normal operation (for BCA Class 1B, 2 to 9 building)
4.4.1.2 Normal operation (for BCA Class 1A and 10 building)
4.4.2 Mains power failure
4.4.3 Verification of the requirements
4.5 Results of test
4.6 Verification of compliance
5 Site installation, test and inspection
5.1 General
5.1.1 Site acceptance test
5.1.2 Maintenance
5.1.3 Inspection
5.2 Type and scope of site acceptance test
5.3 Field measuring equipment for operating forces
5.4 Proof of site acceptance test
5.5 Occupier safety checks
6 Marking
6.1 General
6.2 Drive system
6.3 Complete system
7 Information for operation and use
7.1 General
7.2 Installation and commissioning
7.3 Operating instructions
7.4 Maintenance
7.5 Documentation
Appendix A
Appendix B
Appendix C
Appendix D
D1 General information
D2 Areas/items to be tested
Appendix E
E1 Introduction
E2 Operational inspection and maintenance
E2.1 General
E2.2 Inspection and maintenance frequency
E2.3 Inspection procedure
E3 Recording of maintenance and service
E4 Maintenance personnel
E5 Inspection report
Appendix F
F1 Checklist for sliding and swing doors
F2 Checklist for revolving doors
Appendix G
Cited references in this standard
[Superseded]
Approval and test specification — General requirements for electrical equipment
AS/NZS 1680
Interior lighting set
EN 1760-2
Safety of machinery—Pressure sensitive protective devices, Part 2: Requirements and test procedures for pressure sensitive edges and bars
EN 1760-1
Safety of machinery—Pressure sensitive protective devices, Part 1: Requirements and test procedures for pressure sensitive mats and pressure sensitive floors
[Withdrawn]
Electrical equipment for hazardous areas
Content history
[Superseded]
[Superseded]
DR 07044
AS 5007-2007 REC:2018
$193.66
AUD
Inclusive of GST
Available formats
iconCreated with Sketch.
Available formats
icon_export/16/closeCreated with Sketch.
Web Reader
Instantly view standards in your browser. Search, bookmark, highlight, and comment for anytime access - online and offline.
Web Reader (PDF)
View standards in PDF format in your browser. Search, bookmark, highlight, and comment for anytime access - online and offline.
Web Reader
Licence:
1 user
Total
$193.66
Add to cart
visa logo
mastercard logo
amex logo