Standard
Track updates
AS 4647-2011
[Current]Diaphragm gas meters
Provides basic requirements for diaphragm gas meters under tender, to ensure optimum performance, both, when purchased, and after extended service; and to satisfy the requirements of statutory authorities after due consideration is given to variations in accuracies of meter testing. Covers the working environment, materials of construction and performance required of diaphragm meters of Qmax up to 8 m3/h when tested at standard conditions (MSC) on air.
Published: 15/02/2011
Pages: 35
Table of contents
Cited references
Content history
Table of contents
Header
About this publication
Preface
1 Scope and general
1.1 Scope
1.2 Referenced documents
1.3 Definitions
2 Working environment
2.1 Gas type
2.2 Temperature
2.3 Working pressure
2.4 Mounting
3 Meter construction
3.1 Materials of construction
3.1.1 General
3.1.2 Metal castings
3.1.3 Case jointing materials
3.1.4 Valve covers and grids
3.1.5 Sealing glands
3.1.6 Diaphragms
3.1.7 Gearing
3.1.8 Solder
3.1.9 Plastic components
3.1.10 Resistance to exposure to solar radiation and weathering
3.1.11 Miscellaneous components
3.1.12 Meter connections
3.1.13 Reverse flow devices
3.1.14 Pressure measuring point
3.1.15 Sealing of meters
3.1.16 Protection of interior of meters
3.1.17 Bearings
3.1.18 Entrained solids
3.1.19 Uniformity of meters
3.2 Mechanical strength
3.3 Heat resistance
3.4 Meter index
3.4.1 General
3.4.2 Proving dial or proving drum
3.4.3 Electromechanical or electronic indicating devices
3.4.4 Electrical devices
3.4.5 Pulse outputs
3.4.6 Index housing
3.4.7 Magnetic coupling index drive
3.5 Labelling meters
3.6 Records
4 Performance
4.1 Test medium
4.2 Initial performance
4.3 In-service performance
4.4 Noise in operation
4.5 Recording of test results
5 Routine testing and inspection
5.1 Tests to be conducted
5.1.1 Test environment
5.1.2 Performance tests
5.1.3 Case soundness
5.2 Durability tests
5.3 Test result uncertainty
5.3.1 General
5.3.2 Uncertainty contributors
5.3.3 Accuracy test uncertainty
5.3.4 Determining compliance
5.3.5 Laboratory comparisons
Appendix A
A1 Scope
A2 Principle
A3 Apparatus
A4 Frequency of testing
A5 Procedure
A5.1 General
A5.2 Rigidity test
A5.3 Impact test
A5.4 Flammability test (from UL94)
Appendix B
B1 Scope
B2 Principle
B3 Apparatus
B4 Frequency of testing
B5 Procedure
Appendix C
C1 Scope
C2 Principle
C3 Apparatus
C4 Reagents
C5 Frequency of test
C6 Procedure
Appendix D
D1 Scope
D2 Principle
D3 Apparatus
D4 Frequency of testing
D5 Procedure for meter case distortion test
D6 Procedure for meter case and connection rigidity test
Appendix E
E1 Scope
E2 Principle
E3 Apparatus
E4 Frequency of testing
E5 Procedure
Appendix F
F1 Scope
F2 Principle
F3 Apparatus
F4 Frequency of testing
F5 Procedure
F5.1 Coating thickness
F5.2 Adhesion (cross-cut)
F5.3 Pencil hardness
F5.4 Scratch resistance
F5.5 Humidity resistance
F5.6 Corrosion resistance
Appendix G
G1 Scope
G2 Principle
G3 Apparatus
G4 Frequency of testing
G5 Procedure
Appendix H
H1 Scope
H2 Principle
H3 Apparatus
H4 Frequency of testing
H5 Procedure
H5.1 Low temperature stiffness
H5.2 Temperature stability
H5.3 Ageing resistance
Appendix I
I1 Scope
I2 Principle
I3 Apparatus
I4 Frequency of testing
I5 Procedure
I5.1 Accelerated ageing
I5.2 Porosity test
Appendix J
Cited references in this standard
[Current]
Paints and related materials — Methods of test, Method 481.1.9: Coatings — Exposed to weathering — Degree of blistering
BS 746
Specification for gas meter unions and adaptors
UL 94
Tests For Flammability Of Plastic Materials For Parts In Devices And Appliances
ASTM D2247
Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity
ASTM D1003
Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
One-time Purchase
Access via web browser on any device
One-time purchase
Single publication
Offline access via PDF^
$141.91 AUD
Inclusive of GSTFormat *
Web Reader
Licenses *
1 user
Total$141.91 AUD
IMPORTANT