Standard
Track updates
AS 4123.5-2008
[Pending Revision]Mobile waste containers, Part 5: Performance requirements and test methods
Specifies performance requirements and test methods for mobile waste containers.
Published: 30/06/2008
Pages: 24
Table of contents
Cited references
Content history
Table of contents
Header
About this publication
Preface
1 Scope
2 Referenced documents
3 Definitions
4 Performance requirements
4.1 General
4.2 Requirements before the tests
4.2.1 Visual aspects
4.2.2 Physical properties
4.2.2.1 Components
4.2.2.2 Sizes and dimensions
4.2.2.3 Capacity
4.2.3 Deflection of the frontal receiving system
4.2.4 Mass
4.2.5 Colour
4.2.6 Marking
4.3 Requirements after the tests
5 Test conditions
5.1 General
5.2 Test temperature
5.3 Ballast weight
5.4 Determination of capacities
5.5 Tank method
6 Tests
6.1 Impact tests by ball drop
6.1.1 General
6.1.2 Test procedure
6.1.3 Acceptance criteria for impact tests
6.2 Impact test at inclined plane
6.2.1 General
6.2.2 Test procedure
6.2.3 Acceptance criteria
6.3 Kerb travel (run)
6.3.1 General
6.3.2 Test procedure
6.3.3 Acceptance criteria
6.4 Kerb travel (falls)
6.4.1 General
6.4.2 Test procedure
6.4.2.1 Test condition for two wheeled container
6.4.2.2 Test conditions for four wheeled container
6.4.3 Acceptance criteria
6.5 Drop test at room temperature
6.5.1 General
6.5.2 Test procedure
6.5.3 Acceptance criteria
6.6 Stability test
6.6.1 General
6.6.2 Test procedure
6.6.3 Acceptance criteria
6.7 Pulling, rolling, wheels and brake test
6.7.1 General
6.7.2 Pulling tests
6.7.3 Wheels test
6.7.3.1 General
6.7.3.2 Test procedure
6.7.3.3 Acceptance criteria
6.7.4 Brake test
6.7.4.1 Test procedure
6.7.4.2 Acceptance criteria
6.8 Lifting–tilting tests
6.8.1 General
6.8.2 Lifting–tilting of the empty container
6.8.3 Lifting–tilting of the loaded container
6.9 Miscellaneous tests
6.9.1 Internal stress-cracking test (for thermoplastics only)
6.9.2 Test procedure
6.9.3 Acceptance criteria
6.9.4 Handle test
6.9.4.1 General
6.9.4.2 Test procedure
6.9.4.3 Acceptance criteria
6.9.5 Storage in warm environments
6.9.6 Corrosion test
6.9.7 Weathering (metal containers excluded)
6.9.8 Test method for dome lid container
6.9.8.1 General
6.9.8.2 Test procedure
6.9.8.3 Acceptance criteria
6.9.9 Sequence of the tests
7 Test report
Appendix A
A1 Scope
A2 Statistical sampling
A3 Product certification
A4 Supplier’s quality management system
A5 Other means of assessment
Cited references in this standard
[Withdrawn]
Mobile waste containers, Part 3: Containers with four wheels with a capacity from 770 L to 1300 L with dome lid(s), for trunnion and/or lifting devices — Dimensions and design
[Current]
Mobile waste and recycling containers, Part 2: Containers with four wheels and a capacity from 500 L to 1 200 L with flat lid(s), for lifting devices - Dimensions and design
[Current]
Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test
[Withdrawn]
Mobile waste containers, Part 4: Containers with four wheels with a capacity from 750 L to 1700 L with flat lid(s), for wide trunnion or BG and/or wide comb lifting devices — Dimensions and design
Content history
DR 05349
One-time Purchase
Access via web browser on any device
One-time purchase
Single publication
Offline access via PDF^
$119.17 AUD
Inclusive of GSTFormat *
Web Reader
Licenses *
1 user
Total$119.17 AUD
IMPORTANT