Standard
UPDATE AVAILABLE
Track updates
AS 4049.3-2005
[Current]Specifies requirements for waterborne paints as used for pavement markings on pavement surfaces. Paints are designed for use with Type B and D glass beads complying with AS/NZS 2009.
Published: 26/10/2005
Pages: 34
Table of contents
Cited references
Content history
Table of contents
Header
About this publication
Preface
Foreword
1 Scope
2 Objective
3 Referenced documents
4 Definitions
5 Composition
6 Testing and performance requirements
6.1 Laboratory testing
6.1.1 Condition in the container
6.1.2 Fineness of paint
6.1.3 Consistency
6.1.4 Application properties
6.1.5 No-pick-up time
6.1.6 Early washout resistance
6.1.7 Colour
6.1.8 Specular gloss
6.1.9 Luminance factor
6.1.10 Storage properties
6.2 Field testing
6.2.1 General
6.2.2 Degree of wear
6.2.3 Retroreflectivity
6.2.4 Luminance test
7 Packaging
8 Labelling
Appendix A
Appendix B
B1 Scope
B2 Manufacturer’s technical data
B3 General comments
B4 Successful application
B5 Application guidelines
B5.1 General
B5.2 Optimum drying conditions
B5.2.1 Recommended minimum conditions
B5.2.2 Air temperature
B5.2.3 Relative humidity
B5.2.4 Air movement
B5.2.5 Protection
B5.2.6 Rainfall
B5.3 Paint film thickness
B5.4 Adhesion
B5.5 Night work
B6 Pavement luminance
B7 Skid resistance
B8 Equipment
B9 Packaging
Appendix C
C1 Scope
C2 Background
C3 Testing
C3.1 General
C3.2 Degree of wear
C3.3 Retroreflectivity
C3.4 Luminance test
Appendix D
D1 Containers
D2 Precautions
D3 Procedure
D3.1 General
D3.2 Filling
D3.3 Holding tanks
D3.4 Drums
D4 Labelling
Appendix E
E1 Scope
E2 Principle
E3 Apparatus and material
E3.1 Acetone
E3.2 Sieve
E3.3 Top pan balance
E3.4 Analytical balance
E3.5 Beakers
E3.6 Plastic squeeze bottle
E3.7 Stirring rod
E3.8 Oven
E3.9 Water
E3.10 Paper sheet
E4 Procedure
E5 Calculations
E6 Test report
Appendix F
F1 Scope
F2 Principle
F3 Apparatus
F3.1 Drawdown applicator
F3.2 Test panels
F3.3 Wheel gauge
F3.4 Stopwatch
F3.5 Controlled environment room
F3.6 Humidity and temperature measurement
F3.7 Rain simulator
F4 Test conditions
F5 Procedure
F6 Report
Appendix G
G1 Scope
G2 Test panel material
G3 Paint application
Appendix H
H1 Scope
H2 Principle
H3 Apparatus and materials
H3.1 Calibrated white standard reference tile
H3.2 Test panel
H3.3 Colorimeter or spectrophotometer
H3.4 Brush
H3.5 Colour reference swatches
H3.6 Shadowing device
H3.7 Water
H4 Procedure
H4.1 General
H4.2 Method 1—Laboratory method
H4.3 Method 2—Pavement trials
H5 Test report
H5.1 Method 1
H5.2 Method 2
Appendix I
I1 Scope
I2 Principle
I3 Test site
I4 Apparatus
I4.1 Paint application equipment
I4.1.1 Line marking machine
I4.1.2 Paint mixing apparatus
I4.1.3 Template
I4.1.4 Test panels
I4.1.5 Film thickness
I4.1.6 Meteorological measurement devices
I4.1.7 Roll of heavy paper
I4.1.8 Traffic control devices
I4.2 Measurement of retroreflectivity
I4.3 Assessment of degree of wear
I4.4 Assessment of luminance factor
I5 Application procedure
I6 Assessment procedure
I6.1 Test periods
I6.2 Retroreflectivity
I6.3 Luminance factor
I6.4 Degree of wear
I7 Report
Appendix J
J1 Scope
J2 Principle
J3 Apparatus
J3.1 Photometer or retroreflectometer
J4 Procedure
J5 Report
Appendix K
K1 Scope
K2 Principle
K3 Apparatus and materials
K3.1 Method A—Photographic method
K3.2 Method B—Computer image analysis
K4 Procedure
K4.1 Method A—Photographic method
K4.2 Method B—Computer image analysis
K5 Report
Appendix L
Appendix M
M1 Scope
M2 Statistical sampling
M3 Product certification
M4 Supplier’s quality management system
M5 Other means of assessment
Amendment control sheet
AS 4049.3—2005
Amendment No. 1 (2005)
Correction
Cited references in this standard
Content history
[Current]
[Superseded]
AS 4049.3-2005 Rec:2016
DR 04516