Standard
Track updates
AS 3799-1998
[Current]Liquid membrane-forming curing compounds for concrete
Specifies characteristics and requirements for liquid membrane-forming curing compounds for concrete (referred to as curing compounds). Such compounds are used to limit the loss of water from concrete surfaces during the early hydration method.
Published: 05/11/1998
Pages: 26
Table of contents
Cited references
Content history
Table of contents
Header
About this publication
PREFACE
1 SCOPE AND GENERAL
1.1 SCOPE
1.2 APPLICATION
1.3 REFERENCED DOCUMENTS
1.4 DEFINITIONS
1.5 CLASSIFICATION OF CURING COMPOUNDS
1.5.1 General
1.5.2 Class
1.5.3 Type
2 CHARACTERISTICS
2.1 GENERAL CHARACTERISTICS
2.2 SPECIFIC CHARACTERISTICS
3 REQUIREMENTS
3.1 ACCEPTANCE TESTING
3.1.1 General
3.1.2 Water retention
3.1.3 Reflectance
3.1.4 Drying time
3.1.5 Viscosity
3.1.6 Residue on 150 µm sieve
3.1.7 Shelf life
3.1.8 Non-volatile content
3.1.9 Density
3.2 UNIFORMITY TESTING
3.3 COMPLIANCE WITH STANDARD
APPENDIX A
A1 SCOPE
A2 SAMPLING AT THE POINT OF MANUFACTURE
A3 SAMPLING AT THE POINT OF DELIVERY
A4 PREPARATION OF TEST SAMPLES
A5 IDENTIFICATION, MARKING, STORAGE
A6 REPORT
APPENDIX B
B1 SCOPE
B2 PRINCIPLE
B3 MATERIALS
B4 APPARATUS
B5 PREPARATION OF TRIAL SPECIMEN
B6 PREPARATION OF TEST SPECIMENS
B6.1 Number of specimens
B6.2 Mixing mortar
B6.3 Moulding specimens
B7 STORAGE OF SPECIMENS
B8 PREPARATION FOR TESTING
B9 PROCEDURE
B9.1 General
B9.2 Procedure
B10 CALCULATIONS
B11 NON-STANDARD TESTING
B12 RECORDS
B13 REPORT
APPENDIX C
C1 SCOPE
C2 PRINCIPLE
C3 PROCEDURE
C4 INTERPRETATION OF RESULTS
C5 RECORDS AND REPORT
APPENDIX D
D1 SCOPE
D2 DESCRIPTION
D3 USES
D4 CLASSIFICATION
D5 DESCRIPTION OF CLASSES
D5.1 General
D5.2 Class A—Wax-based compounds
D5.3 Class B—Resin-based compounds
D5.4 Class C—Chlorinated rubber-based compounds
D5.5 Class D—Synthetic polymer compounds
D5.5.1 General
D5.5.2 Emulsion polymer compounds
D5.5.3 Solution polymer compounds
D5.6 Class Z—Other membrane-forming compounds
D6 IMPREGNANTS
D7 CURING COMPOUND CHOICE
D8 APPLICATION
D8.1 General
D8.2 Methods of application
D9 MISCELLANEOUS ASPECTS
D9.1 Adhesion
D9.2 Top-coating over concrete curing compounds
D9.3 Heat reflectance
D9.4 Drying time
D9.5 Viscosity
D9.6 Resilience
D9.7 Flammability
D9.8 Pollution
D9.9 Storage
D9.10 Safety
D10 TESTING
D10.1 Moisture retention
D10.2 Uniformity testing
D11 CONCLUSIONS AND RECOMMENDATIONS
D12 REFERENCES
Cited references in this standard
[Current]
Paints and related materials — Methods of test, Method 211.1: Degree of settling
[Current]
Paints and related materials — Methods of test, Method 214.5: Consistency — Rotational viscometer
[Pending Revision]
Bituminous emulsions for the construction and maintenance of pavements
[Current]
Paints and related materials - Methods of test, Method 301.1: Non-volatile content by mass
One-time Purchase
Access via web browser on any device
One-time purchase
Single publication
Offline access via PDF^
$119.17 AUD
Inclusive of GSTFormat *
Web Reader
Licenses *
1 user
Total$119.17 AUD
IMPORTANT