Standard
Track updates
AS 3499:2022
[Current]Water supply — Flexible hose assemblies
AS 3499:2022 specifies requirements for flexible hose assemblies for use with both heated water and cold water supplies with a maximum heated water temperature of 90 °C used for applications above ground and accessible. Nominal sizes range up to DN 50, a maximum length of 10 m and with a working pressure not exceeding 1 400 kPa at 20 °C.
Published: 04/11/2022
Pages: 39
Table of contents
Cited references
Content history
Table of contents
Header
About this publication
Preface
1 Scope and general
1.1 Scope
1.2 Normative references
1.3 Terms and definitions
1.4 Product conformity
2 Designation
2.1 General
2.2 Sizes
2.2.1 Tube
2.2.2 End connectors
2.2.3 Hose assembly
3 Materials
3.1 General
3.1.1 Corrosion resistance
3.1.2 Contamination of water
3.2 Plastic and elastomeric material
3.2.1 General
3.2.2 Cross-linked polyethylene
3.2.3 Acetal
3.3 Metallic materials
3.3.1 Copper
3.3.2 Copper alloy
3.3.3 Stainless steel
3.4 Seals for end connections and O rings
4 Design
4.1 End connectors
4.1.1 General
4.1.2 Threads
4.1.3 Thread engagement
4.2 Working conditions
4.2.1 Operating temperature
4.2.2 Operating pressure
4.3 Classification
4.4 Marking
5 Product documentation
5.1 General
5.2 Installation instructions
6 Performance requirements
6.1 General
6.2 Watertightness test
6.3 Accelerated ageing by heat treatment test
6.4 Tensile stress resistance test
6.5 Hydraulic pulsation durability test
6.6 Thermal cycling test
6.7 Burst pressure test
6.8 Bending test
6.9 Contamination of water
6.10 Elastomeric materials (tube) — Compression set
6.11 Resistance to corrosion
6.12 Resistance to ultraviolet degradation
6.13 Conformance to specification
Appendix A
A.1 Scope
A.2 Documentation
A.3 Type testing
A.4 Batch release testing
A.5 Retesting
Appendix B
B.1 Scope
B.2 Test samples
B.3 Watertightness test
B.3.1 Principle
B.3.2 Apparatus
B.3.3 Test samples
B.3.4 Procedure
B.3.4.1 General
B.3.4.2 Measurement of deformation under pressure
B.3.4.2.1 Procedure
B.3.4.2.2 Change in length
B.3.4.2.3 Change in external diameter
B.3.4.2.3.1 Determination by measuring the change in external circumference
B.3.4.2.3.2 Direct measurement of change in external diameter
B.3.5 Test report
B.4 Accelerated ageing by heat treatment test
B.4.1 Principle
B.4.2 Apparatus
B.4.3 Test samples
B.4.4 General
B.4.5 Procedure
B.4.6 Test report
B.5 Tensile stress resistance test
B.5.1 Principle
B.5.2 Apparatus
B.5.3 Test samples
B.5.4 Procedure
B.5.5 Test report
B.6 Hydraulic pulsation durability test
B.6.1 Principle
B.6.2 Apparatus
B.6.3 Test samples
B.6.4 Procedure
B.6.5 Test report
B.7 Burst pressure test
B.7.1 Principle
B.7.2 Apparatus
B.7.3 Test samples
B.7.4 Procedure
B.7.5 Test report
B.8 Thermal cycling test
B.8.1 Principle
B.8.2 Apparatus and reagent
B.8.3 Test samples
B.8.4 Procedure
B.8.5 Test report
B.9 Bending test
B.9.1 Principle
B.9.2 Apparatus
B.9.3 Test samples
B.9.4 Procedure
B.9.5 Test report
B.10 Resistance to corrosion
B.10.1 Principle
B.10.2 Apparatus
B.10.3 Test samples
B.10.4 Procedure
B.10.5 Test report
B.11 Resistance to ultraviolet degradation
B.11.1 Principle
B.11.2 Apparatus
B.11.3 Test samples
B.11.4 Procedure
B.11.5 Test report
B.12 Conformance to specification
B.12.1 Principle
B.12.2 Apparatus
B.12.3 Test samples
B.12.4 Procedure
B.12.5 Test report
Bibliography
Cited references in this standard
[Current]
Copper and copper alloys — Compositions and designations of refinery products, wrought products, ingots and castings
[Current]
Pipe threads where pressure-tight joints are made on the threads, Part 1: Dimensions, tolerances and designation
[Withdrawn]
Methods of test for elastomers, Method 13: Compression set of vulcanized rubber under constant deflection
Content history
[Superseded]
[Superseded]
DR AS 3499:2022
AS/NZS 3499:2006 Rec:2016
$133.79
AUD
Inclusive of GST
Available formats
Web Reader
Licence:
1 user
Total
$133.79
