Standard
UPDATE AVAILABLE
Track updates
AS 2942-1994
[Available Superseded]Wheelchair occupant restraint assemblies for motor vehicles
Specifies requirements for restraint assemblies for wheelchairs and their occupants in motor vehicles. In the appendices, a method of testing the assembly under simulated crash conditions is given as well as guidelines for vehicle access and guidelines for the choice of wheelchairs for use in vehicles.
Published: 16/05/1994
Pages: 41
Table of contents
Cited references
Content history
Table of contents
Header
About this publication
PREFACE
FOREWORD
1 SCOPE AND GENERAL
1.1 SCOPE
1.2 REFERENCED DOCUMENTS
1.3 DEFINITIONS
1.4 RESTRAINT TYPES
2 DESIGN, CONSTRUCTION, AND TESTING
2.1 GENERAL
2.2 WHEELCHAIR RESTRAINTS
2.3 OCCUPANT RESTRAINTS
2.3.1 General configuration
2.3.2 Webbing
2.3.3 Webbing components
2.3.4 Adjustment devices
2.3.5 Anchor fittings
2.3.6 Head and back restraints
2.4 WHEELCHAIR LOCATIONS
2.4.1 Restraint assemblies
2.4.2 Restraint assemblies which are designed to be detached from the vehicle without using tools, shall either—
2.5 DETACHABLE RESTRAINTS
2.6 ASSEMBLY ADJUSTMENT
2.6.1 General
2.6.2 Wheelchair restraints
2.6.3 Occupant restraints
2.7 CORROSION PROTECTION
2.8 SURFACE FINISH
2.9 DYNAMIC PERFORMANCE REQUIREMENTS
3 MARKING AND INSTRUCTIONS
3.1 INSTALLATION INSTRUCTIONS
3.1.1 General
3.1.2 Anchorages
3.1.3 Clearspace requirements
3.1.3.1 Space required near fixed structures
3.1.3.2 Spacing of adjacent restraint positions
3.2 MARKING AND PACKAGING
3.2.1 Marking
3.2.2 Exterior packaging requirements
3.2.3 Interior packaging requirements
3.3 INSTRUCTIONS FOR USE
4 DETERMINATION OF CLEARSPACE REQUIREMENTS
4.1 GENERAL
4.2 CLEARSPACE AROUND A WHEELCHAIR POSITION
4.3 SPACING BETWEEN ADJACENT RESTRAINT POSITIONS
APPENDIX A
A1 SCOPE
A2 VEHICLES USED FOR TRANSPORT OF PASSENGERS IN WHEELCHAIRS
A3 SELECTION OF WHEELCHAIR OCCUPANT RESTRAINT ASSEMBLIES
A4 WHEELCHAIRS FOR USE IN VEHICLES
A4.1 General
A4.2 Design and construction
A4.3 Unoccupied wheelchairs in vehicles
A4.4 Head restraint
A4.5 Postural supports
A4.6 Battery restraint
A4.7 Wheelchair trays and fittings
APPENDIX B
B1 SCOPE
B2 PRINCIPLE
B3 APPARATUS
B4 PROCEDURE
B5 TEST REPORT
APPENDIX C
C1 SCOPE
C2 PRINCIPLE
C3 APPARATUS
C4 PROCEDURE
C5 TEST REPORT
APPENDIX D
D1 SCOPE
D2 PRINCIPLE
D3 APPARATUS
D4 PRECONDITIONING
D5 TEST CONDITIONS
D6 PROCEDURE
D7 TEST REPORT
APPENDIX E
APPENDIX F
F1 SCOPE
F2 TEST SPECIMENS
F3 APPARATUS
F4 DYNAMIC TEST CONDITIONS
F5 MEANS OF DETERMINING EXCURSION OF DUMMY
F6 TEST SCHEDULE
F7 TEST PROCEDURE
F8 TEST REPORT
APPENDIX G
G1 GENERAL
G2 DESIGN
G3 CONSTRUCTION
APPENDIX H
H1 GENERAL
H2 EXAMPLE OF INSTRUCTIONS
Cited references in this standard
ADR
Instrument panel
[Pending Revision]
Restraint systems for motor vehicles — Performance tests, Method 4: Determination of adjustment device forces
[Pending Revision]
Restraint systems for motor vehicles — Performance tests, Method 2: Determination of webbing durability in withdrawing and retracting duty through a sash guide
Content history
[Available Superseded]
[Available Superseded]
[Superseded]
DR 91161
$135.16
AUD
Inclusive of GST
Available formats
Web Reader
Licence:
1 user
Total
$135.16
