Table of contents
Cited references
Content history
Table of contents
Header
About this publication
Preface
1 Scope and general
1.1 Scope
1.2 Normative references
1.3 Terms and definitions
1.4 Product conformity evaluation
1.5 New technologies
2 Performance criteria
2.1 Scope of section
2.2 Aim
2.3 Durability
2.3.1 General
2.3.2 Damage
2.3.3 Classification of materials
2.3.4 Durability criteria for connectors and accessories
2.3.5 Alternative materials
2.3.6 Galvanic and chemical compatibility criteria for components and fasteners
2.4 Resistance to water transfer
2.5 Embedment, movement and tolerance
2.6 Structural performance
3 Materials
3.1 Material selection
3.2 Alternative materials
4 Identification markings
4.1 Component marking
4.2 Package marking
5 Testing
5.1 Availability of test reports
5.2 Testing and test reports
5.2.1 Minimum requirements for test reports
5.2.2 Testing of components
Appendix A
A.1 Scope
A.2 Coating thickness inspection method
A.3 Acceptance inspection and sampling
A.4 Thickness readings
A.5 Acceptance criteria
A.6 Wire products galvanized to AS/NZS 4534 OR AS/NZS 4680
A.7 Test report
Appendix B
B.1 Scope
B.2 Initial type testing
B.3 Sampling and testing frequency
B.4 Retesting — Non-conforming product
B.4.1 Further samples
B.4.2 Successful retest
B.4.3 Rejection after retest
B.5 Documentation
Appendix C
C.1 General
C.2 Information to be supplied by the purchaser
C.3 Inspection
Appendix D
D.1 General
D.2 The relationship between atmospheric corrosivity categories and durability class of components
Appendix E
E.1 General
E.2 Magnetic test
E.3 Chemical test
E.4 X-ray fluorescence (XRF) test
E.5 Laboratory test
Appendix F
F.1 Scope
F.2 Principle
F.3 Materials
F.4 Apparatus
F.5 Sample
F.6 Loading regimes
F.7 Notation
F.8 Preparation of specimens for testing
F.8.1 Construction of test specimens
F.8.2 Specimen conditioning
F.8.3 Setting up for testing
F.9 Test procedures
F.9.1 General
F.9.2 Gravity
F.9.3 Cyclonic
F.9.4 Seismic
F.10 Data analysis
F.10.1 Stiffness
F.10.2 Strength
F.11 Test report
Appendix G
G.1 Scope
G.2 Principle
G.3 Materials
G.4 Apparatus
G.5 Sample
G.6 Preparation for testing
G.6.1 Preparation of specimens
G.6.2 Setting up of specimens
G.6.2.1 New cavity constructions (with mortar or adhesive)
G.6.2.2 For new masonry veneer constructions (with mortar or adhesive)
G.6.2.3 For retrofitted connectors and accessories and mortar or adhesive-free connectors and accessories
G.7 Procedure
G.8 Acceptance criteria
G.9 Test report
Bibliography
Cited references in this standard
[Current]
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces
AS/NZS 3660
Termite Management (all parts)
One-time Purchase
Access via web browser on any device
One-time purchase
Single publication
Offline access via PDF^
$141.66 AUD
Inclusive of GSTFormat *
Web Reader
Licenses *
1 user
Total$141.66 AUD
IMPORTANT