Standard
Track updates
AS 2665-2001
[Current]Smoke/heat venting systems — Design, installation and commissioning
Specifies requirements for the design, installation and commissioning of a system of automatic smoke/heat release vents in conjunction with associated smoke reservoirs in buildings.
Published: 15/11/2001
Pages: 15
Table of contents
Cited references
Content history
Table of contents
Header
About this publication
Preface
Foreword
1 Scope and general
1.1 Scope
1.2 Application
1.2.1 General
1.2.2 Building Code of Australia
1.3 Referenced documents
1.4 Definitions
2 Design
2.1 General
2.1.1 System components
2.1.2 Areas requiring special consideration
2.1.2.1 Abnormal fire hazard
2.1.2.2 High risk areas in a building
2.1.2.3 Sprinklered buildings
2.2 Vents
2.2.1 General
2.2.2 Effective aerodynamic area
2.2.3 Spacing
2.2.4 Vents in a roof having a ceiling
2.2.5 Method of operation
2.2.5.1 General
2.2.5.2 Temperature operation
2.2.5.3 Smoke detection
2.2.5.4 Manual override controls
2.2.5.5 Failure position
2.3 Smoke reservoirs
2.3.1 Size
2.3.2 Depth
2.4 Inlet ventilation
3 Installation
3.1 Installation or vents
3.1.1 General
3.1.2 Pitch angle
3.1.3 Water from sprinklers not to wet the thermally released link
3.1.4 Security devices
3.1.5 System plan
3.2 Installation of smoke curtains
3.2.1 Smoke curtains suspended from the roof structure
3.2.2 Sawtooth roofs
3.2.3 Bottom edges in high risk areas
3.2.4 Holes for fastenings
3.2.5 Leakage
3.2.6 Smoke curtains in sprinklered buildings
4 Commissioning
4.1 Manual check
4.2 Remote manual control check
Appendix A
A1 General
A2 Venting of heat
A3 Release of smoke
A4 Smoke/heat release systems
Appendix B
B1 Areas of abnormal fire hazard
B2 Use of the building or space therein
B3 Materials in a space of abnormal fire hazard
Appendix C
Cited references in this standard
[Superseded]
Automatic fire sprinkler systems (known as the SAA Code for Automatic Fire Sprinkler Systems)
[Available Superseded]
Minimum design loads on structures (known as the SAA Loading Code), Part 2: Wind loads
[Current]
Methods for fire tests on building materials, components and structures, Part 1: Combustibility test for materials (ISO 1182:2020, NEQ)
One-time Purchase
Access via web browser on any device
One-time purchase
Single publication
Offline access via PDF^
$104.71 AUD
Inclusive of GSTFormat *
Web Reader
Licenses *
1 user
Total$104.71 AUD
IMPORTANT