Standard
UPDATE AVAILABLE
AS 1906.3-1992
[Superseded]Retroreflective materials and devices for road traffic control purposes, Part 3: Raised pavement markers (retroreflective and non-retroreflective)
Specifies performance requirements for retroreflective and non-retroreflective raised pavement markers which are to be bonded directly to the pavement surface. It does not preclude the development of markers with alternative methods of fixing to the road, but in such cases it specifies that performance shall be not less than for those directly bonded to the surface. Test methods are given in appendices to this Standard.
Published: 15/06/1992
Pages: 22
Table of contents
Cited references
Content history
Table of contents
Header
About this publication
PREFACE
FOREWORD
1 SCOPE AND GENERAL
1.1 SCOPE
1.2 DESCRIPTION
1.3 REFERENCED DOCUMENTS
1.4 DEFINITIONS
2 CLASSIFICATION
2.1 GENERAL CATEGORIES
2.2 RETROREFLECTIVE PERFORMANCE CATEGORIES
2.3 TYPE ACCEPTANCE TESTING
2.3.1 Purpose
2.3.2 Procedure
2.3.3 Type acceptance
3 PERFORMANCE REQUIREMENTS
3.1 GENERAL
3.1.1 Application
3.1.2 Sampling and testing sequence
3.2 DIMENSIONS AND SHAPE
3.3 REFLECTIVE PROPERTIES
3.3.1 Retroreflective performance
3.3.1.1 Type A1 and Type A/B1 markers
3.3.1.2 Type A2 and Type A/B2 markers
3.3.1.3 Type A(XXXX) and Type A/B(XXXX)markers
3.3.2 Luminance factor—Type B and Type A/B markers
3.4 COLOUR
3.4.1 Type A and Type A/B markers
3.4.2 Type B and Type A/B markers
3.5 GENERAL PHYSICAL REQUIREMENTS
3.5.1 Water absorption
3.5.2 Heat test
3.5.3 UV exposure test
3.5.4 Impact resistance (Type A and Type A/B markers)
3.5.5 Compressive strength
3.5.6 Glaze thickness
3.5.7 Adhesive bond strength
3.5.8 Additional requirements for Type B and Type A/B markers
4 MARKING AND PACKAGING
APPENDIX A
A1 SCOPE
A2 METHODS OF MEASUREMENT
A3 INSTRUMENTATION
A4 PROCEDURE AND CALCULATION—DIRECT METHOD
A5 PROCEDURE AND CALCULATION—INDIRECT METHOD
A6 CONDITIONING OF TEST PIECES
A6.1 New markers
A6.2 Markers conditioned under traffic
A7 REPORT
APPENDIX B
B1 SCOPE
B2 PRINCIPLE
B3 TEST SAMPLE
B4 PROCEDURE
B5 REPORT
APPENDIX C
C1 SCOPE
C2 APPARATUS
C2.1 General
C2.2 Reflectometer
C2.3 Colorimeter
C3 TEST SAMPLE
C4 PROCEDURE
C4.1 Reflectometer
C4.2 Colorimeter
C5 REPORT
APPENDIX D
D1 SCOPE
D2 APPARATUS AND MATERIALS
D3 TEST SAMPLE
D4 PROCEDURE
D5 REPORT
APPENDIX E
E1 SCOPE
E2 APPARATUS
E3 TEST SAMPLE
E4 PROCEDURE
E5 REPORT
APPENDIX F
F1 SCOPE
F2 PRINCIPLE
F3 APPARATUS
F4 TEST SAMPLE
F5 PROCEDURE
F6 REPORT
APPENDIX G
G1 SCOPE
G2 APPLICATION
G3 APPARATUS
G4 TEST SAMPLE
G5 PROCEDURE
G6 REPORT
APPENDIX H
H1 SCOPE
H2 APPARATUS
H3 TEST SAMPLE
H4 PREPARATION OF TEST PIECES
H5 PROCEDURE
H6 REPORT
APPENDIX I
I1 SCOPE
I2 APPARATUS
I3 TEST SAMPLE
I4 PROCEDURE
I5 REPORT
APPENDIX J
J1 SCOPE
J2 APPARATUS AND MATERIALS
J3 TEST SAMPLE
J4 PREPARATION OF TEST ASSEMBLIES
J5 PROCEDURE
J6 CALCULATION
J7 REPORT
Cited references in this standard
CIE 13.2
Method of measuring and specifying colour rendering—Properties of light sources
[Superseded]
Methods of test for textiles, Method 4.1: Colourfastness tests — Definitions and general requirements
[Withdrawn]
Metal finishing — Preparation and pretreatment of metal surfaces prior to protective coating, Part 10: Cleaning and preparation of metal surfaces using acid solutions (non-immersion)
Content history
[Current]
[Superseded]
[Superseded]
[Superseded]
[Superseded]
One-time Purchase
Access via web browser on any device
One-time purchase
Single publication
Offline access via PDF^
$104.71 AUD
Inclusive of GSTFormat *
Web Reader
Licenses *
1 user
Total$104.71 AUD
IMPORTANT