Standard
Track updates
iconCreated with Sketch.

AS 1810-1995

[Current]

Timber — Seasoned cypress pine — Milled products

Specifies tolerance, machining grade limits and grade descriptions for tongue and groove flooring, light decking, lining, dressed boards, joinery stock and moulding, cladding, fascia boards, and barge boards milled from cypress pine and supplied seasoned. Appendices give information on requirements for finger-joining and recommendation for the installation of finishings and maintenance of cypress decking.
Published: 05/01/1995
Pages: 17
Table of contents
Cited references
Content history
Table of contents
Header
About this publication
PREFACE
1 SCOPE AND GENERAL
1.1 SCOPE
1.2 REFERENCED DOCUMENTS
1.3 DEFINITIONS
1.4 GRADES
1.5 MARKING
2 GENERAL REQUIREMENTS
2.1 MOISTURE CONTENT
2.2 SAPWOOD
2.3 MEASUREMENT OF GRADE LIMITS AND DIMENSIONS
2.3.1 Knots, holes, resin pockets and overgrowth of injury
2.3.2 Bow and spring
2.3.3 Twist
2.3.4 Cupping
2.4 FINGER-JOINTED CYPRESS PINE
2.5 GLUE-LAMINATED CYPRESS PINE
2.6 END MATCHING
2.7 GRADING
2.7.1 Surface finish
2.7.2 Back and unexposed edges
3 FLOORING AND LIGHTDECKING
3.1 GENERAL
3.2 PROFILES
3.2.1 Tongued and grooved flooring
3.2.2 Light decking
3.3 TOLERANCES
3.3.1 Tongued and grooved flooring
3.3.2 Light decking
3.4 GRADE
3.5 MACHINING GRADE LIMITS
4 LINING
4.1 PROFILES
4.2 TOLERANCES
4.3 GRADE
4.4 MACHINING GRADE LIMITS
5 DRESSED BOARDS, JOINERY STOCK AND MOULDINGS, CLADDING, FASCIA AND BARGE BOARDS
5.1 PROFILES
5.2 TOLERANCES
5.3 GRADE
5.4 MACHINING GRADE LIMITS
APPENDIX A
A1 SCOPE
A2 GRADE 1
A2.1 Non-permissible defects
A2.2 Permissible imperfections
A3 GRADE 2
A3.1 Non-permissible defects
A3.2 Permissible imperfections
A4 LIMITATION OF TWIST
A4.1 General
A4.2 Method 1
A4.3 Method 2
A4.4 Working examples
A4.4.1 For Grade 1
A4.4.2 For Grade 2
APPENDIX B
B1 SCOPE
B2 GRADE
B3 FINGERS
B4 BONDING
APPENDIX C
C1 SCOPE
C2 RECOMMENDED PROCEDURES
C2.1 Pre-installation finishing
C2.2 INSTALLATION OF DECKING
C2.2.1 Board orientation
C2.2.2 Nail type
C2.2.3 Nailing
C2.3 Post-installation finishing
C2.4 Maintenance
Cited references in this standard
[Superseded]
Glossary of terms used in timber Standards
[Superseded]
Methods of testing timber, Part 1: Moisture content
[Superseded]
Glued-laminated structural timber
[Superseded]
Finger-jointed and/or laminated radiata pine scantlings (Metric units)
[Current]
Residential timber-framed construction — AS 1684.2 (Non-cyclone areas) & AS 1684.3 (Cyclone areas) Supplements
Content history
[Superseded]
AS 1810-1995 Rec:2016
DR 91083
[Superseded]
[Superseded]

One-time Purchase

Access via web browser on any device
One-time purchase
Single publication
Offline access via PDF^

$104.71 AUD

Inclusive of GST
Format *
iconCreated with Sketch.
Web Reader
Licenses *
iconCreated with Sketch.
1 user
Total$104.71 AUD
Add to Cart
IMPORTANT