Standard
UPDATE AVAILABLE
Track updates
AS 1670.3:2018
[Available Superseded]Fire detection, warning, control and intercom systems - System design, installation and commissioning, Part 3: Fire alarm monitoring
The Standard specifies the requirements for fire alarm monitoring systems between the monitored fire detection and alarm system and the fire dispatch centre and includes requirements for the monitoring equipment.
Published: 21/12/2018
Pages: 21
Table of contents
Cited references
Content history
Table of contents
Header
About this publication
Preface
1 Scope and general
1.1 Scope
1.2 Application
1.3 Referenced documents
1.4 Definitions
1.5 Abbreviations
1.6 Tolerance measurements
1.7 System design
1.7.1 General
1.7.2 Baseline data—Monitored site
1.7.3 Baseline data—Network and monitoring centre
1.7.4 Alterations to existing systems
1.8 Application of normative references
2 Design criteria
2.1 Connection between the FDAS and ASE
2.2 Connection between the ASE and monitoring centre
2.2.1 General
2.2.2 Network reliability
2.2.3 Monitoring centre protocol
2.2.4 Time clocks
2.3 Maximum transfer time
2.4 Monitoring centre
2.4.1 General
2.4.2 Indicating and logging equipment
2.4.2.1 General
2.4.2.2 Reliability
2.4.3 Voice recording equipment
2.4.4 Telecommunication
2.4.5 Clocks
2.4.6 Ancillary equipment
2.4.7 Standby lighting
2.4.8 Records
2.4.9 Critical failure response
2.5 Monitoring centre power source
2.5.1 General
2.5.2 Other loads
2.6 Connection between monitoring centre and fire dispatch centre
2.7 Commissioning
3 Monitored site installation
3.1 General
3.2 Alarm signalling equipment (ASE)
3.3 Covering door
3.4 Power supply equipment (PSE)
3.4.1 General
3.4.2 Main power source
3.4.3
3.4.4 Standby power source
3.4.5
3.4.6 Battery capacity calculation
3.4.7 Battery charging current
3.4.8 Batteries and cabinet
3.5 Combined FDCIE and ASE
3.6 Cabling systems
3.6.1 General
3.6.2 Joints
3.6.3 Conductors
3.6.4 Cable marking
3.7 Transmission path supervision
3.8 Transmission path protection
3.9
4 Commissioning
4.1 General
4.2 Monitored site
4.3 Network and monitoring centre assessment
Appendix A
A1 General
A2 Multiple paths
Appendix B
B1 General
B2 WSXX
B3 WSX1
B4 WSX2
B5 WSX3
B6 WSX4
B7 WSX5
Appendix C
Amendment control sheet
AS 1670.3:2018
Amendment No. 1 (2021)
Revised text amendment
Cited references in this standard
IEC 60331.25
Test for electric cables under fire conditions—Circuit integrity, Part 25: Procedures and requirements—Optical fibre cables
[Current]
Fire detection and alarm systems, Part 13: Compatibility assessment of system components (ISO 7240-13:2018 (ED.2.0) MOD)
[Current]
Fire detection and alarm systems, Part 4: Power supply equipment (ISO 7240-4:2017, MOD)
[Current]
Fire detection, warning, control and intercom systems - Control and indicating equipment, Part 6: Alarm signalling equipment
Content history
[Current]
[Current]
[Superseded]
DR AS 1670.3:2017
DR AS 1670.3:2018
One-time Purchase
Access via web browser on any device
One-time purchase
Single publication
Offline access via PDF^
$95.34 AUD
Inclusive of GSTFormat *
Web Reader
Licenses *
1 user
Total$95.34 AUD
IMPORTANT