Standard
Track updates
AS 1074-1989
[Current]Steel tubes and tubulars for ordinary service
Specifies requirements for threaded steel tubes and tubulars and plain-end steel tubes, suitable for screwing as specified in AS 1722.1 with DN 8 to DN 150 inclusive (nominal size) and three wall thickness designated Light, Medium and Heavy.
Published: 10/04/1989
Pages: 12
Table of contents
Cited references
Content history
Table of contents
Header
About this publication
PREFACE
1 SCOPE AND GENERAL
1.1 SCOPE
1.2 REFERENCED DOCUMENTS
1.3 DEFINITIONS
1.4 DESIGNATION
2 TUBES
2.1 PROCESS OF MANUFACTURE
2.2 MATERIAL
2.3 DIMENSIONS OF TUBES
2.4 PERMISSIBLE VARIATION IN THICKNESS, DIAMETER, AND MASS
2.5 SCREW THREADS
2.6 LENGTHS
2.6.1 Standard lengths
2.6.2 Exact lengths
2.7 GALVANIZING
2.8 LEAK TIGHTNESS TEST
2.9 DUCTILITY OF FINISHED TUBES
2.9.1 Tubes of DN 50 and smaller
2.9.2 Tubes larger than DN 50
2.10 WORKMANSHIP
2.11 MARKING
2.12 PROTECTION
3 SOCKETS
3.1 PROCESS OF MANUFACTURE
3.2 MATERIAL
3.3 DIMENSIONS
3.4 SCREW THREADS
3.5 GALVANIZING
4 TUBULARS
4.1 GENERAL
4.2 THREADS
4.3 GALVANIZING
4.4 PIECES
4.5 NIPPLES
4.6 LONGSCREWS
4.7 SOCKETS AND BACKNUTS
4.8 BENDS AND SPRINGS
4.9 RETURN BENDS
APPENDIX A
APPENDIX B
B1 SCOPE
B2 APPARATUS
B3 REFERENCE STANDARDS
B4 PROCEDURE
APPENDIX C
C1 SCOPE
C2 APPARATUS
C3 REFERENCE STANDARDS
C4 PROCEDURE
Cited references in this standard
BS 3894
Method for converting elongation values for steel, Part 1: Carbon and low alloy steels
One-time Purchase
Access via web browser on any device
One-time purchase
Single publication
Offline access via PDF^
$59.99 AUD
Inclusive of GSTFormat *
Web Reader
Licenses *
1 user
Total$59.99 AUD
IMPORTANT